Toshiba D-VR17KB Satellite Link, 36 EN, Press SAT.LINK, Select the time, media or mode using

E9GA0BD_EN.book Page 36 Monday, March 26, 2007 10:14 AM

If the recording time is partially overlapped:

•The timer programming with the earlier start time (PROG. 2) has priority. PROG. 1 will start after PROG. 2 recording is complete.

PROG. 1
PROG. 2
Actual	PROG. 2	PROG. 1
recording

The first 2 minutes (at the longest) will be cut off.

If the recording time entirely overlaps:

•The shorter timer programming (PROG. 1) is not recorded.

PROG. 1
PROG. 2
Actual	PROG. 2
recording

Note for DVD recording

•If the recording time of two programmes are overlapped, or the End time of a programme and the Start time of another is same, the first 2 minutes (at the longest) of the subsequent programme will be cut off.

If the End time of the programme currently being recorded and the Start time of the subsequent programme are same:

•If PROG. 1 is a DVD recorded programme, the beginning of PROG. 2 may be cut off.

PROG. 1
PROG. 2
Actual	PROG. 1	PROG. 2
recording

The first 2 minutes

(at the longest) will be cut off.*

*If the cut off time exceeds 3 minutes, the error number “E40” will appear in the Timer Programming list.

Satellite Link

You can set the unit to start recording whenever it detects the video scart control from the external tuner.

Preparing for the Satellite Link Timer Recording:

[Preparation of the external tuner]

•The external tuner should be equipped with some kind of timer function. Using timer function of the tuner, set it to be turned on when it comes to the time you want to start recording, and off when it comes to the time you want to finish recording. (Refer to the tuner’s manual on how to set the timer.)

•Make sure to turn off the external tuner when you finish setting.

[Preparation of this unit]

•Make sure to select the desired Recording mode beforehand.

External tuner (not supplied)

Scart cable (not supplied)

		DVD			ANTENNA
	DIGITAL	AUDIO	S-VIDEO COMPONENT
	AUDIO OUT	OUT	OUT	VIDEO OUT
				Y	IN
			L	PB
	COAXIAL			/CB
AV1(TV)
			R	PR
				/CR
					OUT

1	Press [SAT.LINK].
2	Select the time, media or mode using
	[U / D], then press [ENTER].
		Satellite Link
			Start	DVD	Mode
				VCR
			0:00 DVD		XP
				To Standby Mode

3 Set the desired start time using [U / D], then press [P].

•The hour can be selected among 0-23.

•Repeat this step to set the desired minutes.

4 Select the recording media using [U / D], then press [P].

5 Select the recording mode using [U / D].

Refer to “Recording Mode” on page 26 for DVD or page 72 for VCR.

•If you want to edit the time, media or mode press [L], then press [U / D] to correct them.

36 EN