Toshiba D-VR17KB owner manual 68 EN, Subtitle Language Default OFF, Angle Icon Default on

E9GA0BD_EN.book Page 68 Monday, March 26, 2007 10:14 AM

5. Subtitle Language (Default: OFF)

Set the Subtitle language.

Select a language using [U / D], then press [ENTER].

Subtitle Language

OFF

English

Other

Your setting is activated.

If “Other” is selected, enter the appropriate 4-digit code using [the Number buttons].

Refer to “Language Code” on page 79.

Code Input

- - - -

When you finish entering the code, press [ENTER].

Hint

•You can also change or switch off the subtitles on a DVD from the disc menu if it is available.

•Press [CLEAR] or [L] to erase numbers entered incorrectly.

Note

•You can only select the languages supported by the inserted disc.

•The Audio Language setting may not be available for some discs.

6. Angle Icon (Default: ON)

Set the angle icon.

Select a setting using [U / D], then press [ENTER].

Angle Icon

ON

OFF

Your setting is activated.

7. Still Mode (Default : Auto)

Select a setting using [U / D], then press [ENTER].

Still Mode

Auto

Field

Frame

Your setting is activated.

Auto:	Automatically select the best resolution
	setting (“Frame” or “Field”) based on the
	data characteristics of the pictures.
Field:	Select “Field” when the pictures are still
	unstable even if “Auto” is selected. “Field”
	stabilises the pictures, although the picture
	quality may become coarse due to the
	limited amount of data.
Frame:	Select “Frame” to display relatively
	motionless pictures in higher resolution.
	“Frame” improves the picture quality,
	although it may unstabilise the pictures due
	to simultaneous output of two Field data.

Note

•An individual picture on TV screen is called as Frame, which consists of two separate images called as Field. Some pictures may be blurred at the “Auto” setting in still mode due to their data characteristics.

8. TV System (Default: PAL)

Select a setting using [U / D], then press [ENTER].

TV System

PAL

Auto

Your setting will be activated.

PAL: Outputs a modified PAL signal for viewing discs recorded with the NTSC system on a PAL system TV.

Auto: Changes the video system (PAL / NTSC) automatically according to the format of the inserted disc.

Note

•With discs recorded using the PAL system, a PAL signal is output for viewing on a PAL system TV.

•Discs recorded with the PAL system cannot be viewed on an NTSC system TV.

•With discs recorded using the NTSC system, an NTSC signal is output for viewing on an NTSC or Multi system TV.

•With discs recorded using the NTSC system, select PAL to view on a PAL system TV.

68 EN