Toshiba D-VR17KB Setting a Disc to Protect, 40 EN, To cancel the disc protect, Disc is protected

In stop mode, press [SETUP].

E9GA0BD_EN.book Page 40 Monday, March 26, 2007 10:14 AM

8 Press [VCR].

Make sure to select a recording mode using [REC MODE]. (See page 72.)

Rewind or fast forward the tape to the point where you want to start recording.

9 Press [DUBBING].

DVD to VCR duplication will start.

10 Press [STOP S] to stop the recording.

Note

•NTSC dubbing is prohibited in this unit.

•Dubbing Mode is available only if the tape or disc is not copy-protected.

•You cannot change the output mode during VCR to DVD or DVD to VCR duplication.

•If you want to watch the duplicated material, after the DVD to VCR duplication, press [VCR] first and then press [PLAY P].

Setting a Disc to Protect

VR

DVD-RW DVD+RW DVD+R

To prevent accidental over-recording, editing or erasing of recordings, you can protect them using the Setup menu.

Insert a recordable disc.

1

2 Select “DVD Menu” using [U / D], then press [ENTER].

3 Select “Disc Protect OFF ON” using [U / D], then press [ENTER].

4 Select “Yes” using [U / D], then press [ENTER].

The disc is protected.

5 Press [SETUP] to exit.

Note

•The Disc Protect setting is available only when a disc recorded in VR or +VR mode is inserted.

•You can select only “Disc Protect ON OFF” when a protected disc is inserted.

To cancel the disc protect:

•Select “Disc Protect ON OFF” at step 3, then select “Yes”.

•If you insert a disc protected with this unit, “Disc Protect ON OFF” will appear instead of “OFF ON”.

40 EN