Toshiba D-VR17KB owner manual Dubbing Mode, Press Dubbing, VCR to DVD, DVD to VCR

E9GA0BD_EN.book Page 39 Monday, March 26, 2007 10:14 AM

Dubbing Mode

Video VR

DVD-RW DVD-RW DVD-R DVD+RW

DVD+R VCR

You can copy a DVD disc to a videotape or copy a videotape to a DVD disc. This function will be available only if the DVD disc or the tape is not copy- protected. Before starting this function, prepare for the recording on the DVD-RW/-R, DVD+RW/+R disc or the videotape. See pages 26 and 72.

Note for recording to a tape:

•The tape’s record tab is intact.

•The videotape is long enough to record the DVD disc.

Note for recording to a disc:

•The DVD disc is satisfied with the recording status. See page 26.

Insert a disc and a tape with a record tab.

1 In stop mode, press [SETUP]. Select “General Setting” using [U / D], then press [ENTER].

2 Select “Recording” using [U / D], then press [ENTER].

3 Select “Dubbing Mode” using [U / D], then press [ENTER].

Option window will appear.

VCR to DVD

4 Select “VCR		DVD” using [U / D],
then press [ENTER].
General Setting
Playback
Display			Auto Chapter
Video			Recording Audio Select (XP)
Recording			Auto Finalise
Clock	Dubbing Mode
			Aspect Ratio (Video mode)
Channel		VCR	DVD
DivX		DVD MakeVCRRecording Compatible
Reset All			Bilingual Recording Audio
			External Input Audio

5 Press [SETUP] to exit.

6 Press [VCR].

7 Press [PLAY P], and then press [PAUSE p] at the point you wish to start recording.

8 Press [DVD].

Make sure to select a recording mode using [REC MODE]. (See page 26.)

9 Press [DUBBING].

VCR to DVD duplication will start.

10 Press [STOP S] to stop the recording.

Note for VCR to DVD duplication:

•After starting VCR to DVD duplication, the picture may be distorted because of the auto tracking function. This is not a malfunction. Be advised to play back the tape until the picture is stabilised, then set the starting point which you wish to start recording, and start VCR to DVD duplication.

•This unit will automatically stop the duplication if playback with no image detected for more than 3 minutes during VCR to DVD duplication.

•If the playback sound mode of VCR is set to “STEREO”, “LEFT” or “RIGHT”, the sound mode upon dubbing is automatically switched to “STEREO”. If the playback sound mode is set to “MONO”, the sound mode upon dubbing is also “MONO”.

•If you set “External Input Audio” to “Stereo”, the sound is recorded in “Stereo” (Video mode, VR mode and +VR mode).

•While in Video mode or +VR mode, if you set “External Input Audio” to “Bilingual”, the audio set in “Bilingual Recording Audio” mode is recorded. While in VR mode, if you set “External Input Audio” to “Bilingual”, bilingual audio is recorded.

•The main and sub audio will be simultaneously recorded (VR mode). You can select audio modes during playback.

•If you want to watch the duplicated material, after the VCR to DVD duplication, press [DVD] first then press [PLAY P].

DVD to VCR

4 Select “DVD		VCR” using [U / D],
then press [ENTER].
General Setting
Playback
Display			Auto Chapter
Video			Recording Audio Select (XP)
Recording			Auto Finalise
Clock	Dubbing Mode
			Aspect Ratio (Video mode)
Channel		VCR DubbingDVD		Mode
DivX		DVD	VCR	Compatible
Reset All			Bilingual Recording Audio
			External Input Audio

5 Press [SETUP] to exit the Setup menu.

6 Press [DVD].

7 Press [PLAY P], and then press [PAUSE p] at the point you wish to start recording.

EN 39

Introduction Connections Basic Setup Recording Playback

Editing Function Setup VCR Functions Others