Pioneer XV-DV303, S-DV303 operating instructions DVD/CD/Video CD player, STANDBY/ON button

11Additional information

DVD/CD/Video CD player

ProblemRemedy

The disc is ejected automatically after loading.

•Clean the disc.

•Align the disc properly in the disc guide.

•If the region number on a DVD-video disc does not

match the number on the player, the disc cannot be used (page 8).

•Allow time for any condensation inside the player to evapo- rate. Avoid using the player near an air-conditioning unit.

Playback is not possible.	• If the disc is loaded upside down, reload the disc with the label
	side face up.
Picture playback stops and the	• Press 7, then start playback again (3).
operation buttons cannot be	• Switch the power off once, then on again using the front panel
used.	STANDBY/ON button.
Settings are canceled.	• When the power is cut due to power failure or by unplugging
	the power cord, settings will be canceled.
No picture/No color.	• Check that connections are correct and that plugs are inserted
	fully.
	• Check the instruction manual of the TV/monitor to make sure
	the TV/monitor settings are incorrect.
Screen is stretched or aspect does	• The TV Screen setting is incorrect. Set the TV Screen option to
not change.	match the TV/monitor you're using (page 51).
When recorded on a VCR or	• Due to the player’s copy protection circuits, connection of this
passed through an AV selector,	device through a VCR or an AV selector may prevent recording or
there is disturbance in the	cause picture problems. This is not a malfunction.
playback picture.
Picture disturbance during	• This player is compatible with Macro-Vision System copy guard.
playback or dark.	Some discs include a copy prevention signal, and when this type
	of disc is played back, stripes etc., may appear on some sections
	of the picture depending on the TV. This is not a malfunction.
	• Discs respond differently to particular player functions. This
	may result in the screen becoming black for a brief instant or
	shaking slightly when the function is executed. These problems
	are largely due to differences between discs and disc content
	and are not malfunctions of this player.
The 96kHz display doesn’t light	• If the 96kHz source is copy-protected the 96kHz display will
when playing a 96kHz source.	not light.
Noticeable difference in DVD and	• DVDs and CDs use different recording methods. This is not a
CD volume.	malfunction.

64

En