Toshiba 40UX600U, 55UX600U Easy Setup using PIN Personal Identification Number, Assisted Setup

Chapter 8: Advanced features

To cancel searching for the AP:

Press RETURN while searching for the AP. A message will appear. Then press C or c to select Yes and press OK .

Easy Setup using PIN (Personal Identification Number)

1From the PREFERENCES menu, highlight

Network Setup and press OK .

2Press B or b to highlight Wireless Setup, and press

OK .

3Press B or b to highlight Easy Setup, and press OK .

4 Press C or c to select PIN.

5 Press b to highlight Start Scan, and press OK .

6Press B or b to select the desired AP and press OK .

Note: Check the MAC address on label of the AP or the manual of it and select an AP.

7When the PIN code window appears, enter the displayed PIN into your AP, and then press OK to start the PIN Setup. When a message displays to report that the setup was successful, press OK .

To cancel searching for the AP:

Press RETURN while searching for the AP. A message will appear. Then press C or c to select Yes and press OK .

Assisted Setup

1From the PREFERENCES menu, highlight

Network Setup and press OK .

2Press B or b to highlight Wireless Setup, and press

OK .

3Press B or b to highlight Assisted Setup, and press

OK .

4Press B or b to select the desired AP and press OK .

Note: Check the MAC address on label of the AP or the manual of it and select an AP.

5Highlight Security Key and press OK . The Software Keyboard window will appear.

6Input the Security Key by using the Software Keyboard (- page 69). To save your setting, press the BLUE button.

Note:

•The Security Key must adhere to these conditions: -TKIP/AES: 8-63 ASCII or 64 Hex characters -WEP: 5 or 13 ASCII or 10 or 26 Hex characters

•Key ID of WEP encryption to set is only one.

7Highlight Done, and then press OK .

Note: If Network Name is not displayed, see step 4 and 5 in Manual Setup (- the next column) to set Network Name before pressing Done.

Note: Settings are not saved if RETURN is pressed before Done is selected.

Manual Setup

1From the PREFERENCES menu, highlight

Network Setup and press OK .

2Press B or b to highlight Wireless Setup, and press OK .

3Press B or b to highlight Manual Setup, and press

OK .

4Press B or b to highlight Network Name, and press OK . The Software Keyboard window will appear.

5Input the Network Name by using the Software Keyboard (- page 69). To save your setting, press the BLUE button.

6Press B or b to highlight Authentication, and then press C or c to select Open System, Shared Key, WPA-PSKor WPA2-PSK.

7Press B or b to highlight Encryption, and then press C or c to select None, WEP, TKIP or AES.

Note:

•Certain encryption types are only compatible with specific authentication types.

-When Authentication is Open System, only WEP or None is compatible.

-When Authentication is Shared Key, only WEP is compatible.

-When Authentication is WPA-PSK or WPA2-PSK, only TKIP or AES is compatible.

•When incompatible Authentication/Encryption pairings are attempted, a warning message will be displayed, and no connection attempt will be made until the incompatibility is resolved.

•Key ID of WEP encryption to set is only one.

8Press B or b to highlight Security Key, and press OK . The Software Keyboard window will appear.

9Input the Security Key by using the Software Keyboard (- page 69). To save your setting, press the BLUE button.

Note: This item is grayed out when Encryption is None.

10 Highlight Done, and then press OK .

Note: When Encryption is None, a message will appear. Press C or c to select Yes and press OK .

Note: Settings are not saved if RETURN is pressed before Done is selected.

66