Toshiba 55UX600U manual Advanced Network Setup, Wireless Information, IP Address Setup, Auto Setup

Chapter 8: Advanced features

Wireless Information

The settings configured in Wireless Setup can be confirmed.

1Press QU CK to open the Quick menu.

2Press B or b to select Wireless Information and press OK .

3When the AP connection succeeds, a Wireless Information window will appear.

Note: Press the RED button if you confirm the situation of surrounding APs.

Item	Description
	Connected is displayed when the TV is
Status	connecting with the AP.
	Disconnected is displayed when the
	TV is disconnecting with the AP.
Signal	Connection signal strength with AP
	(STRONG/MEDIUM/WEAK)
Speed	The link speed with AP
Mode	Working mode (11a, 11b, 11g, 11n)
Channel	A channel in use (1-165)
Network Name	SSID set
Authentication	Authentication set
Encryption	Encryption set
Security Key	Security Key set
AP MAC	The AP's MAC address is displayed
Address	when the TV is connecting with AP.
USB MAC	The MAC address of USB (Dual Band
Address	WLAN Adapter) is displayed.
	Enabled is displayed when you use
DHCP	DHCP.
	Disabled is displayed when you do not
	use DHCP.
IP Address	The TV's IP address
Subnet Mask	Value of the Subnet Mask
Default	Address of the Default GATEWAY
Gateway
DNS	Address of the DNS

Note: Even if AP for IEEE 802.11n is used when Encryption is set to WEP or TKIP, the Speed value might be low. Encryption is recommended to be changed to AES (- left-hand column).

Advanced Network Setup

Note:

•When the DHCP function of the router connected with this TV is On, you can set Auto Setup to On or Off. (Usually set it to On.)

•When the DHCP function of the router is Off, set Auto Setup to Off, and manually set IP Address or DNS Address.

IP Address Setup

Auto Setup:

1From the PREFERENCES menu, highlight

Network Setup and press OK .

2Press B or b to highlight Advanced Network Setup, and press OK .

3Press B or b to highlight IP Address Setup, and press OK .

4Highlight Auto Setup, and then press C or c to select On.

Note: Other items will be grayed out when Auto Setup is set to On.

Manual Setup:

1From the PREFERENCES menu, highlight

Network Setup and press OK .

2Press B or b to highlight Advanced Network Setup, and press OK .

3Press B or b to highlight IP Address Setup, and press OK .

4Highlight Auto Setup, and then press C or c to select Off.

5Press B or b to highlight IP Address.

6Press C or c to highlight the field you want to change, and then use the number buttons to input the IP address. To save the setting, press OK .

Note:

•IP address field numbers must be between 0 and

255.If you input an incompatible number and press OK , the field number will reset to the previous value.

7Press B or b to highlight Subnet Mask, and edit in the same way as IP Address.

8Press B or b to highlight Default Gateway, and edit in a way same as IP Address.

Note: If you manually set the IP address, you must not use the same IP address for any other device. The IP address you use should be a private address. If you do not know the correct values to use, please contact your network administrator or internet service provider.

67