Toshiba 46UX600U Selecting the video input to view, Switching between two channels using SurfLock

Chapter 6: Basic features

Switching between two channels using Channel Return

The Channel Return feature allows you to switch between two channels without entering an actual channel number each time. This feature also works for external inputs.

1Select the first channel you want to view.

2Select a second channel using the Channel Number buttons (and the dash (=) button if needed).

3 Press CH on the remote control. The previous

RTN

channel will display. Each time you press CH , the

RTN

TV will switch back and forth between the last two channels that were tuned.

Switching between two channels using SurfLock™

The SurfLock™ feature temporarily “memorizes” one

channel to the CH button, so you can return to that

RTN

channel quickly from any other channel with CH . This

RTN

feature also works for external inputs.

To memorize a channel to the CH button:

RTN

1 Tune the channel you want to program into the CH

RTN

button.

2 Press and hold CH for about 2 seconds until the

RTN

message “Memorized” appears. The channel has

been programmed to the CH button.

RTN

3You can then change channels repeatedly, and

when you press CH , the memorized channel will be

RTN

tuned.

The TV will return to the memorized channel one time

only. Once you press CH and then change channels

RTN

again, the memory will be cleared and the button will function as Channel Return.

Selecting the video input to view

To select the video input to view:

1Press + on the remote control or TV control panel.

2And then either:

•Press 0–6; or

•Repeatedly press B or b, then press OK to change the input; or

•Repeatedly press + to change the input.

Inputs

0ANT/CABLE

1ColorStream HD

2HDMI 1 REGZA-LINK

3HDMI 2

4 HDMI 3

5HDMI 4

6PC

Note:

•You can label the video input sources according to the specific devices you have connected to the TV

(- “Labeling video input sources” on page 36).

•Sources can also be skipped (- “Setting video input skip” on page 36).

•Inputs that are set to skip will be grayed out and will be skipped over when selecting inputs by repeatedly pressing + or B or b. They are only available by using direct number entry.

•If one or more REGZA-LINK®devices are connected to an HDMI input, the REGZA-LINK®icon will appear in the input selector. In this case, the label (- page 36) will not appear in the input selector.

To select a REGZA-LINK®device:

1Press B or b to highlight an appropriate HDMI input.

2Press c to display the list of REGZA-LINK®devices for that input.

3If there are multiple REGZA-LINK®devices on the input, use B or b to highlight a particular device.

4 Press OK to select the device and change inputs.

41