Toshiba 46UX600U Viewing Movie files On Dlna Certified Server, To set the Media Server Setup

•Depending on the file size, it may take some time to start playback.

2 Press D to stop playback.

3 If playback finishes before D is pressed, the screen will return to the list.

Note: When the repeat mode is set to All, the next file will start playing automatically.

To pause playback:

Press A during playback.

To resume normal playback, press S.

Note:

• You can move to the desired replay position by pressing C or c during PAUSE.

• PAUSE or operations during PAUSE may not be able to operate depending on contents, DMC or DMS.

To play in fast reverse or fast forward directions: Press H or J during playback. Each time you press the H or J, the playback speed will change.

•H: Fast reverse playback

•J: Fast forward playback

To locate a specific file:

Press F or G repeatedly to access the desired file.

•F: Playback starts from the beginning of the current file. When you press twice quickly, playback starts from the beginning of the previous file.

•G: To locate subsequent files.

Note:

• If the previous or next file is not compatible, it will be skipped automatically.

• When the TV is used as a DMR, this feature is not available.

• These features may not be able to be operated depending on the contents, DMC or DMS.

77

Chapter 8: Advanced features

To set the Media Server Setup:

You only need to complete the Media Server Setup if you want to memorize DMS to be woken up later by the TV.

1From the APPLICATIONS menu, highlight Media Player, and then press OK .

2Press B or b to highlight Setup, and press OK .

3Press B or b to highlight Media Server Setup, and press OK . The list that contains the currently active DMSs and the registered DMSs will appear.

4Press B or b to select the desired device, and press OK . A check will appear in the box. To remove the

check, press OK again.

5Press c to highlight Done, and then press OK .

Note:

•The setting is not saved when RETURN is pressed before Done is pressed.

•Up to 8 DMSs can be selected.

•Even if the device checked is power-off, it is displayed but grayed out in the Select Device window. When OK is pressed on a highlighted grayed out item, a confirmation of Wake-on-LAN is displayed. The TV tries to wake up the DMS if Yes is pressed. The Server will start if it supports Wake-on-LAN feature.

•Depending on Media Server, it may not start even if Wake-on-LAN is sent.

•When some DMSs are connected, it may take time until the list is displayed. The list may be smoothly displayed by the following operation.

-The device selection window is closed once and it is displayed again.

-The RED button is pressed.

Viewing Movie files

(on DLNA CERTIFIED™ Server)

Basic Playback:

1After selecting a file (- “To select a file in the list of contents” on page 76), press OK or S to begin playback.

Note:

•When you highlight the file without pressing OK , the content is played on a preview screen. When OK is pressed, it is played in the full screen mode.