Toshiba 46UX600U, 40UX600U manual Basic features, Tuning channels, Setting the Channel Tuning Mode

Chapter 6: Basic features

Tuning channels

Setting the Channel Tuning Mode

This feature allows you to choose how tuning will be handled for analog and digital channels when the TV is in Antenna mode.

Note: To use this feature, ANT/CABLE In must be set to Antenna (- page 35).

The channel tuning mode has three options.

Mode	Description
Standard	Both analog and digital channels can be
	tuned normally
	Digital channels will have priority
	when manually entering a channel
Auto	number using the Channel Numbers (0-
(default)	9) on the remote control, analog
	channels can still be tuned by < / , if
	available
Digital	Only digital channels can be tuned

To set the Channel Tuning Mode:

1From the SETUP menu, highlight TV Settings and press OK .

2Press B or b to highlight Channel Tuning Mode.

3Press C or c to select your desired mode and then press EX T .

Note: The Channel Options window as well as the Channel Browser ANT/CABLE List will be updated automatically when you change the mode. Also, the History List will be cleared, but the Favorites List will be saved.

Tuning to the next programmed channel

To tune to the next programmed channel:

Press < or , on the remote control or TV control panel.

Note: This feature will not work unless you program channels into the TV’s channel memory (- page 35).

Tuning to a specific channel (programmed or unprogrammed)

Tuning analog channels:

Press the Channel Number (0–9) on the remote control. For example, to select channel 125, press 1, 2, 5, then OK .

Tuning digital channels:

Enter the major Channel Number (0–9) on the remote control, followed by the dash (=) button and then the sub-channel number. For example, to select digital channel 125-1, press 1, 2, 5, –, 1, then OK .

38