Using the TV’s features
Picture adjustment
Selecting the picture size
1 Press and hold O until the picture size list appears on the screen, then press u or U to select the appropriate picture size (or press O repeatedly to select required picture size directly).
The antenna input signal
Wide
Super Live 2
Cinema 2 4:3
Super Live 1
Cinema 1
Subtitle
14:9
2 Press Q.
Super Live 1
When receiving “4:3 format” signal, this setting will enlarge the image to fit the screen by stretching the image vertically and horizontally, holding the better proportions at the center of the image.
Cinema 1
When watching “letterbox format” films/video tapes, this setting will eliminate or reduce the black bars at the top and bottom of the screen by zooming in and selecting the image without distortion.
Subtitle
When subtitles are included on a letterbox format broadcast, this setting will raise the picture so that the most of text is displayed.
Subtitle
14:9
Use this setting when watching a 14:9 broadcast.
Wide
Use this setting when watching a
Super Live 2
When receiving “side panel format” signal, this setting will enlarge the image to fit the screen by stretching the image vertically and horizontally, holding the better proportions at the center of the image. Also the black bars on the both sides of the screen will eliminate or reduce.
Cinema 2
When watching “all sides panel format” films/video tapes, this setting will eliminate or reduce the black bars on all the sides of the screen by zooming in and selecting the image without distortion.
4:3
Use this setting to view a true 4:3 broadcast.
Notes:
•Using the special functions to change the size of the displayed image (e.g. changing the height/width ratio) for the purpose of public display or commercial gain may infringe on copyright laws.
•If the aspect ratio of the selected format is different from the one of the TV transmission or video program, it can cause a difference in vision. Change to the correct aspect ratio picture size.
•In the PC input mode (- page 21), the picture size selection is wide or normal only.
•In the 1080i or 720p input signal mode, the picture size selections are Super Live 1, Cinema 1, Wide, Super Live 2, Cinema 2 and 4:3.
•In HDMI 1080i input, you can additionally choose Exact Scan. Use this setting to view the same size of the display image as the HDMI source.
•With Exact Scan selection, you may observe a shift in picture position. This is due to the signal source and is not a defect of the TV.
15