Using the TV’s features
Using the cinema mode
A movie film’s picture runs at 24 frames a second, whereas movie software such as DVD, etc., that you enjoy watching on television at home runs at 30 (NTSC) or 25 (PAL) frames a second. To convert this signal to reproduce a smooth motion and picture quality, select the On mode.
Effective signal and setup conditions:
•When the Video input mode is selected.
•When the input signal format is 480i and 576i signals.
1 Press M, then press I or i to display the PICTURE menu.
PICTURE |
|
| |
Picture settings | OK | ||
|
|
|
|
3D Color management |
| Off |
|
Base color adjustment |
|
| |
|
| ||
Cinema mode |
| On |
|
|
|
|
|
MENU Back EXIT Watch TV |
|
| |
2 Press u or U to select Cinema mode, then press I or i to select On or Off.
Note:
When a DVD movie with subtitle is playing back, this mode may not work correctly.
Using the auto format
When the TV receives a true HDMI signal picture and the auto format is On, it will automatically be displayed in HDMI signal format, irrespective of the TV’s previous setting.
1 Press M, then press I or i to display the FUNCTION menu.
| FUNCTION | ||
Teletext |
| Auto |
|
|
|
|
|
Auto format |
| On |
|
|
|
|
|
Blue screen |
| On |
|
|
|
| |
Side panel |
| 1 |
|
|
|
|
|
MENU Back | EXIT Watch TV | ||
2 Press u or U to select Auto format, then press I or i to select On or Off.
Sound adjustment
Setting the MTS (Multi-channel TV Sound)
Auto mode
The MTS Auto mode automatically recognize stereo/bilingual programs depending on the broadcast signal.
1 Press M, then press I or i to display the SOUND menu.
SOUND | 1/2 | |
MTS | Auto |
|
|
|
|
Dual | Dual 1 |
|
|
|
|
Bass | 0 |
|
|
|
|
Treble | 0 |
|
|
|
|
|
|
|
Balance | 0 |
|
WOW | OK | |
MENU Back EXIT Watch TV
2 Press u or U to select MTS, then press I or i to select Auto or Mono.
Mono mode
If you experience noise or poor reception of any stereo/ bilingual program, set the MTS mode to Mono. Noise will be reduced and reception may improve.
Note:
If you experience noise with a particular program on whose channel reception is usually good, try setting MTS mode to Auto, then switch S to e Mono (monaural) (- page 19).
Selecting the dual 1 or dual 2 mode
You can hear only dual 1 or dual 2 sound selected, whenever bilingual programs are received.
1
2 Press u or U to select Dual, then press I or i to select Dual 1 or Dual 2.
Notes:
•When the MTS setting is in Mono mode, the Dual menu is not selectable.
•The Dual menu setting status remains even if the TV is turned off.
18