Toshiba 65H14 owner manual Connecting a VCR, Connecting a cable converter box

Page 9

Connecting a VCR

This connection allows you to watch local channels and video programs, play or record on the VCR while watching TV, and record from one channel while watching another channel.

You will need:

•two coaxial cables

•one set of A/V cables

From Cable Box or Antenna

Stereo VCR

IN

IN from ANT OUT to TV

CH 3			OUT
CH 3
CH 4	VIDEO	L	R
			AUDIO

TV

Connecting a cable converter box

This connection allows you to watch basic and premium cable channels.

To watch basic cable and use the TV’s features, select ANT-1. To view premium channels, select ANT-2, tune the TV to channel 3 or 4 (whichever channel is vacant in your area), and use the converter box to change channels.

Note:

If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable.

If you have a VCR with S-video, use an S- video cable (in the S-video jacks) instead of the standard video cable.

Do not connect a standard video cable and an S-video cable to Video-1 (or Video-2) at the same time, or the picture performance will be unacceptable.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

Note:

When you use a converter box with your TV, the remote control will not operate some features, such as programming your favorite channels, labeling channels, and locking channels.

Introduction


Connecting	yourTV


Usingthe	RemoteControl


Settingup	yourTV

theTV’s	Features

You will need:

• three coaxial cables

TV

From Cable

OUT IN

Using

Appendix

Cable converter box

Index

9

Image 9

Contents Projection Television Dear Customer Safety PrecautionsInstallation Important Safety InstructionsCare ServiceImportant Safety Precautions for Split Cabinet Feature Important Safety Information Introduction Exploring your new TV Welcome to ToshibaConnecting in Antena or cable TV Connecting your TVConnecting a VCR Connecting a cable converter boxYou will need Three coaxial cables You will need Four coaxial cables One set of A/V cables Connecting a cable converter box and VCRSatellite Satellite Receiver Dish Connecting a DVD player or satellite receiver and a VCRFrom Antenna Stereo VCR From DTV Antenna Connecting two VCRs Connecting a camcorderYou will need Two coaxial cables Two sets of A/V cables One pair of standard analog audio cables One Hdmi cable type a connectorConnecting an audio system Preparing the remote control for use Installing the remote control batteriesIf you have a Toshiba device Remote control codes Htib 100 Adjusts the volume level Learning about the remote controlPOP Direct CH allows direct access to POP channels CH RTN returns to the memorized channelLearning about the menu system Press Enter to activate the function settings in the menusChanging the on-screen display language Selecting the antenna inputPress y or z to highlight your desired language Programming channels automatically Adding channels to the TV’s memoryPress Enter Press z to select CH Program Press Channel y or z to view the programmed channelsAdding and erasing channels manually Changing channelsManually adjusting the color convergence Adjusting the color convergenceWhen the adjustment is complete, the normal picture appears Automatically100 To reset your adjustmentsSwitching between two channels using Channel Return Adjusting the channel settingsSwitching between two channels using SurfLock Programming your favorite channelsPress Enter Repeat steps 4 and 5 for other channels Press y or z to highlightFavorite CH Repeat to enter the rest of the characters Labeling channelsTo erase channel labels Press z or y to highlightSelecting the picture size Press PIC Size on the remote controlNone of the picture is hidden Hidden areas, see Scrolling Theater Wide picture onPress Enter to display the Scroll Adjustment mode Press PIC Size to select the Theater Wide 2 or 3 modePress MENU, and then press x or until Picture menu AppearsPress y or z to highlight Auto ASPECT, and then press Using the Auto Aspect featureEnter Press y or z to select ON, and then press EnterTo close the POP window Press Split again or Exit Using the POP double-window featureSwitching the main and POP pictures Switching the speaker sound of main and POP programsSelected input source indicator is displayed in purple Double-Window aspect ratio Using the programmed channel search functionAbout the auto favorite feature Using the favorite channel search functionUsing the V-CHIP menu Using the Locks menuEntering the PIN code If you cannot remember your PIN codeTV Rating Independent rating system for broadcasters Enable BlockingMpaa Rating Mpaa Rating Independent rating system for moviesMpaa Unrated TV None RatingUnlocking programs temporarily Locking channelsPress Enter Repeat steps 3 and 4 for other channelsPress y or z to highlight Clear ALL, and then press Enter Changing the PIN code Locking the video inputsOFF Press Enter New PIN code is now activeAdjusting the picture Selecting the picture modeAdjusting the picture quality Selecting the color temperature Press x or to select the mode you preferSaving your new preferences Resetting picture adjustments Using the CableClear DNR featureReset DoneSelecting the cinema mode Selecting the display format for 480p signals onlyPress y or z to select FilmTo change Selecting the video input sourcePress y or z to highlight Caption or TEXT, and then press Using the closed caption featureSetting the sleep timer Setting the on timerSetting the clock Press Enter to start the clockTo display the time on-screen Press Recall Muting the sound Adjusting the soundSelecting stereo/SAP broadcasts Press y or z to highlight MTS, and then press EnterAdjusting the sound quality Using the WOW surround sound featurePress y or z to adjust the item, then press Enter Audio Settings menu appearsResetting your audio adjustments Using the StableSound featureTo turn off the StableSound feature Select OFF in above Selecting the Audio OUT sound Turning off the built-in speakersTo turn on the built-in speakers Select on in above Press y or z to select Main or POP, and then press EnterUnderstanding the last mode memory feature Understanding the auto power off featureSelecting the background of the menu display Displaying on-screen informationAppendix SpecificationsTroubleshooting Limited United States Warranty Limited Canada Warranty Index Page Manufactured by