Toshiba P47LSA owner manual Guide to Simple Problem Solving, Factory default setting

Page 24

Input signal selection and its contents

This page can be displayed by using [Down] key while at the Main Menu page, appeared in page 21.

This page is convenient to check the incoming resolution as indicated here as 1024x768@60Hz.

“IGP” is indicating that the input signal is coming from Graphic card signal, as Input Graphic Processor.

A Guide to Simple Problem Solving

Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing.

	Symptom	Check these things	Page
	No picture	．Make sure the power cord is plugged in.	17
		．Maybe the power is Off or Standby.	17
		．Check whether the auxiliary equipment is connected.	14
		．Check the input setting is correct.	14
		．Signal may not be suitable.	14
	The remote control does	not．Make sure the battery is inserted matching the + and – marks of	12
	operate	the battery compartment.	12
	operate	the battery compartment.
		．The battery may be exhausted.	12
		．Use the remote control aiming at the remote control sensor.	11

The picture color is pale, or not ．Check the picture quality adjustment. clear

．If you are using YUV terminals, make sure cables are correctly connected.

19

N/A

Factory default setting

Item	Default	Item	Default

Power switch	Off	Color temp.	User

Brightness	80	Red	225

Contrast	50	Green	225

Hue	0	Blue	225

Saturation	50	Language	English

Flesh-tone	Off	Light Sensor	Off

Gamma Correction	Off	Light Sensor Value	25

Auto Config	On

24

Image 24

Contents LCD Monitor Contents Safety Instructions May cause death or serious injury*1May cause injury*2 or material damage*3 Example of figureIf not, the unit may fall down and cause an injury Insert the power plug fully into a 100 － 240V AC outlet Follow these precautions for the power cord and plugDo not place the unit in a location subject to vibration Do not place objects on the unitInstallation Do not install the unit where humidity is high Do not insert objects inside the unitTake measures to prevent the unit from falling down Precautions for moving the unit Never insert or remove the power plug with wet handsDo not block the ventilation holes on the unit Do not overload outlets or cables beyond their capacityPrecautions for the remote control battery Consult your dealer for internal cleaning once a yearDo not push or jolt the LCD panel Features Specifications NTSC/PAL/PCNames and Functions of Controls Unit FrontSide Controls BackNames and Functions of Controls Remote control Battery InstallationAbout the remote control Effective rangeSupplied Accessories Please check all are suppliedConnection You can select Video input from 3 terminals belowYou can select RGB input from 2 terminals below Installation For inquiries and repairDimension Power On/Off Main power switchPower button on the remote control Function of Remote control Menu FunctionMenu display chart VGA DVIMain Menu Display MenuPosition Menu Color MenuPIP Control OSD On Screen Display ControlPage Guide to Simple Problem Solving Factory default settingSymptom Check these things Input signal selection and its contentsInput Signal VGAAnnex About trademarks