Toshiba P47LSA Precautions for the remote control battery, Do not push or jolt the LCD panel

Page 8

Precautions for the remote control battery:

Only use the specified battery type.

Be sure to insert battery by matching the + and –.

Do not recharge, heat, disassemble, short or throw battery into a fire. Do not use the battery beyond their usage period (designated on the battery), do not leave worn out battery in the unit.

If these precautions are not observed, it may lead to battery leakage or explosion and may cause burn and injury.

If leaked liquid gets into your eyes or gets in touch with your skin, it may hurt your eyes or your skin. If leaked liquid gets into your eyes or mouth or comes in contact with your skin, rinse the contacted area with clean water immediately and consult your doctor. If the leaked liquid comes in contact with your cloth, rinse the contacted area with clean water immediately. If the leaked liquid comes in contact with other equipments, clean them without touching the leaked liquid.

Do not push or jolt the LCD panel

The glass of the LCD panel may break and cause injury.

If the screen glass breaks, crystalline liquid leakage may occur. Do not touch crystalline liquid.

If leaked liquid gets into your eyes or comes in contact with your skin, it may hurt your eyes or your skin. If leaked liquid gets into your eyes or mouth or comes in contact with your skin, rinse the contacted area with clean water immediately and consult your doctor. If the leaked liquid comes in contact with your cloth, rinse the contacted area with clean water immediately. Should the leaked liquid come in contact with other equipment, clean them without touching the leaked liquid.

This product contains chemicals, including mercury, known to the State of California to cause birth defects or other reproductive harm.

Cleaning

Remove the power plug before cleaning.

If not, it may cause electrical shock.

Consult your dealer for internal cleaning once a year.

If dust accumulates on the unit, it may cause fire or malfunction when operate it.

Cleaning is effective especially before the rainy season when humidity is high.

Refer to your dealer about the service charge for internal cleaning.

8

Image 8
Contents LCD Monitor Contents Safety Instructions May cause death or serious injury*1May cause injury*2 or material damage*3 Example of figureIf not, the unit may fall down and cause an injury Insert the power plug fully into a 100 - 240V AC outlet Follow these precautions for the power cord and plugDo not place the unit in a location subject to vibration Do not place objects on the unitTake measures to prevent the unit from falling down Installation Do not install the unit where humidity is highDo not insert objects inside the unit Precautions for moving the unit Never insert or remove the power plug with wet handsDo not block the ventilation holes on the unit Do not overload outlets or cables beyond their capacityDo not push or jolt the LCD panel Precautions for the remote control batteryConsult your dealer for internal cleaning once a year Features Specifications NTSC/PAL/PCNames and Functions of Controls Unit FrontSide Controls BackNames and Functions of Controls Remote control Battery InstallationAbout the remote control Effective rangeSupplied Accessories Please check all are suppliedYou can select RGB input from 2 terminals below ConnectionYou can select Video input from 3 terminals below Installation For inquiries and repairDimension Power button on the remote control Power On/OffMain power switch Function of Remote control Menu FunctionMenu display chart VGA DVIMain Menu Display MenuPosition Menu Color MenuPIP Control OSD On Screen Display ControlPage Guide to Simple Problem Solving Factory default settingSymptom Check these things Input signal selection and its contentsInput Signal VGAAnnex About trademarks