Toshiba P47LSA owner manual PIP Control, OSD On Screen Display Control

Page 22

PIP Control page

In this page, Picture-in picture feature is selected.

PIP can insert such as PC image on the base and Video image in the small window, this is one of the example. The position and also the size of the inserted image are possible to modify by selecting the “adjust mode” by [Up] or [Down] key, then using [Left] or [Right] key to select.

Also, refer to the picture below left, this is indicating

PIP icon and selecting this icon and using [Enter] button, This picture appears. In this page, adjustments for the Inserted picture is possible.

When this PIP icon is selected and then [Down] button Pushed, then, below right picture will appear, indicating Which signal is selected for the inserted picture.

It is possible to select different input with this page. Right now, S-Video is selected and highlighted.

The pictures below show ‘S-Video’ below the PIP icon, this is indicating the PIP small picture input that was selected. At the below right, the small indication below the Y-C icon, IVP which stands for ‘Input Video Processor’ indicated and when RGB is selected, this will change to IGP, ‘Input Graphic Processor’.

In this picture above left, PIP Control page is present and this is somewhat doubled the function with the Previous Picture adjustment page, refer to the top section in this page.

If the new selection has done by PIP page, PIP Control, the new setting will be effective.

OSD ( On Screen Display ) Control page

Refer to the picture in next page, this page makes possible to modify the OSD display, changing the H/V position, making the OSD image semi-transparent or see-through adjustment, Time out which is possible to change the OSD display period, shorter or longer, at the position of 0: time out, OSD remain and will not disappear. Also the OSD size can be changed.

22

Image 22
Contents LCD Monitor Contents May cause injury*2 or material damage*3 Safety InstructionsMay cause death or serious injury*1 Example of figureIf not, the unit may fall down and cause an injury Do not place the unit in a location subject to vibration Insert the power plug fully into a 100 - 240V AC outletFollow these precautions for the power cord and plug Do not place objects on the unitDo not insert objects inside the unit Installation Do not install the unit where humidity is highTake measures to prevent the unit from falling down Do not block the ventilation holes on the unit Precautions for moving the unitNever insert or remove the power plug with wet hands Do not overload outlets or cables beyond their capacityConsult your dealer for internal cleaning once a year Precautions for the remote control batteryDo not push or jolt the LCD panel Features Specifications NTSC/PAL/PCSide Controls Names and Functions of Controls UnitFront BackAbout the remote control Names and Functions of Controls Remote controlBattery Installation Effective rangeSupplied Accessories Please check all are suppliedYou can select Video input from 3 terminals below ConnectionYou can select RGB input from 2 terminals below Installation For inquiries and repairDimension Main power switch Power On/OffPower button on the remote control Function of Remote control Menu FunctionMenu display chart VGA DVIMain Menu Display MenuPosition Menu Color MenuPIP Control OSD On Screen Display ControlPage Symptom Check these things Guide to Simple Problem SolvingFactory default setting Input signal selection and its contentsInput Signal VGAAnnex About trademarks