Toshiba 43A61 owner manual Changing channels, Adding and erasing channels manually

Adding and erasing channels manually

After you have programmed the channels automatically, you can manually add and erase specific channels.

To manually add or erase channels:

1.Select the channel you want to add or erase. If you are adding a channel, you must select the channel using the Channel Number buttons.

2.Press MENU, and then press x or • until the SET UP menu appears.

3.Press y or z to highlight ADD/ERASE.

LIGHT RECALL POWER

TV

CABLE MUTE TV/VIDEO TIMER VCR

1	2	3
		CH
4	5	6
7	8	9
		CH RTN VOL
100	0	ENT
		ADV/
.CAPT	PIP CH
		MENU
C

Channel yz

Channel

Numbers

MENU

Introduction
Connecting	yourTV

SET UP
LANGUAGE	ENGL I SH
CLOCK SET
ANT 1 / 2	ANT 1
TV / CABLE	CABLE
CH PROGRAM
ADD / ERASE	ADD / ERASE

4.Press x or • to select Add or Erase, depending on the function you want to perform.

5.Repeat steps 1–4 for other channels you want to add or erase.

Changing channels

To change to the next programmed channel:

Press Channel y or z on the TV or remote control.

To change to a specific channel (programmed or unprogrammed): Press the Channel Number buttons (0–9 and 100).

For channels 100 and higher, press 100 and the next two numbers. For example, to select channel 100, press 100, 0, 0. To select channel 125, press 100, 2, 5.

Changing channels using SpeedSurf

To use SpeedSurf to change to a specific programmed channel:

While no menu is on-screen, press and hold Channel y or z for about one second. The TV will enter SpeedSurf mode.

		Upper channels
1 6	T B S	↑
1 3	E S P N
1 1	F O X	Current channel
7	C B S
4	C N N	↓
		Lower channels

Channel label (if set)

Repeatedly press or hold Channel y or z while the SpeedSurf mode is on-screen to scroll the channel list. Release the button to display the highlighted channel.

FAV		ENTER	FAV
			yzx •
	RESET	ADV/	EXIT
		PIP CH

Usingthe	RemoteControl
Settingup	yourTV
UsingtheTV’s	Features
Appendix
Index

21