Toshiba 43A61 owner manual Adjusting the sound, Muting the sound, Selecting stereo/SAP broadcasts

Page 39

Adjusting the sound

Muting the sound

Press MUTE to temporarily turn off the sound. While the sound is off, the screen will display the word MUTE in the lower right corner. To restore the sound, press MUTE again.

When you press the MUTE button, you automatically activate the closed caption feature. To deactivate this feature, press the MUTE button again. This feature only works when the closed caption mode is set to OFF. See “Using the closed caption feature” on page 37 for more information.

Selecting stereo/SAP broadcasts

The multi-channel TV sound (MTS) feature allows you to listen to high-fidelity stereo sound while you watch TV. MTS can also transmit a second audio program (SAP) containing a second language, music, or other audio information (when provided by individual stations).

When the TV receives a stereo or SAP broadcast, the word STEREO or SAP appears on-screen every time you turn the TV on, change the channel, or press RECALL.

The MTS feature is not available when the TV is in VIDEO mode.

To listen to stereo sound:

1.Press MENU, and then press x or • until the AUDIO menu appears.

LIGHT RECALL POWER

TV

CABLE MUTE TV/VIDEO TIMER VCR

1

2

3

 

 

 

 

CH

4

5

6

 

7

8

9

 

 

 

CH RTN

VOL

100

0

ENT

 

 

ADV/

 

.CAPT

PIP CH

MENU

 

 

C

 

 

 

FAV

ENTER

FAV

RESET

ADV/

EXIT

 

 

PIP CH

 

STOP SOURCE

PLAY PIP

REC

TV/VCR

REW

FF

 

STILL

LOCATE

SWAP

RECALL

MUTE

MENU

yzx •

Introduction

 

 

 

 

 

Connecting

yourTV

 

 

 

 

Usingthe

RemoteControl

 

 

up

 

AUD I O

MTSMONO

BASS5 0

TREBLE5 0

BALANCE0

RESET

2.Press y or z to highlight MTS.

3.Press x or • to highlight STEREO.

AUD I O

 

MTS

STEREO / SAP / MONO

BASS

5 0

TREBLE

5 0

BALANCE

0

RESET

 

You can leave your TV in STEREO mode because it automatically outputs the type of sound being broadcast (stereo or monaural). If the stereo sound is noisy, select MONO to reduce the noise. The word STEREO or SAP displays in yellow in the menu when the TV receives the signal.

To listen to SAP (if available):

1.Press MENU, and then press x or • until the AUDIO menu appears.

2.Press y or z to highlight MTS.

3.Press x or • to highlight SAP. You will hear the station’s second audio program (if available) from the speakers while viewing the original program’s picture (see note at right).

Note :

A second audio program (SAP) can be heard only on those TV stations that offer it. For example, some TV stations broadcast music as a second audio program. If you have SAP on, you will see the current program on the screen but hear music instead of the programÕs normal audio.

If you have SAP on, and the station you are watching is not currently broadcasting a second audio program, you will see the picture but not hear any sound. If this happens, but the TV in STEREO mode so you can hear the stationÕs normal audio.

Setting

yourTV

 

 

UsingtheTV’s

Features

 

 

 

 

Appendix

 

 

 

 

 

Index

 

 

 

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents 50A61, 50A62 Dear Customer Safety PrecautionsInstallation Important Safety InstructionsCare ServiceImportant Safety Information Introduction Introduction Welcome to ToshibaExploring your new TV Connecting a VCR Connecting your TVConnecting a cable converter box and a VCR Connecting a cable converter boxTwo video cables One set of component video cables Connecting a DVD player or satellite receiver and a VCRFrom Antenna Connecting two VCRsConnecting an audio system Connecting a camcorderConnection example of Dolby Pro Logic surround system Connecting an A/V receiverUsing the remote control with a VCR or a cable TV converter Using the remote controlPreparing the remote control for use Installing the remote control batteriesUsing the Remote Control Brand name Code number VCR code tableABC Cable TV converter code tableLearning about the remote control Press Exit to close an on-screen display instantly Setting up your TVChanging the on-screen display language Selecting the antenna inputPress x or to highlight your desired language Adding channels to the TV’s memory Programming channels automaticallyPress z to select CH Program Changing channels using SpeedSurf Changing channelsAdding and erasing channels manually Adjusting the color convergence Press x or to display the center convergence menuPress Exit twice to close the convergence menus Programming your favorite channels Using the TV’s featuresAdjusting the channel settings Switching between two channelsLabeling channels Using the TV’s FeaturesChannel Number Watching picture-in-picture PIP Into the program block mode. See ÒUsing the V-CHIP menuÓ onSwitching the main and small pictures Changing the position of the small pictureFreezing the small picture If you cannot remember your PIN code Changing the PIN codeEntering the PIN code TV Rating Independent rating system for broadcasters Using the V-CHIP menuFrom the Locks menu, select Mpaa Rating Independent rating system for moviesMovie ratings you can lock are described as follows Locks menuUnlocking programs temporarily Locking channelsLocking video inputs Locking the front panel buttonsTo unlock the front panel buttons Select OFF in above Selecting the picture modes Adjusting the pictureAdjusting the picture quality To adjust the picture qualitySaving new preferences Using the flesh tone featureUsing the noise reduction feature To turn off the flesh tone feature Highlight OFF in aboveResetting your picture adjustments Selecting the color temperatureSelecting the video input labels Watching video inputTo view text, highlight T1, T2, T3, or T4 Using the closed caption featureClosed caption feature has two options To turn off the closed-caption feature, highlight OFFTo display the time on-screen Press Recall Setting the sleep timerSetting the clock Press Enter to start the timerAdjusting the sound Muting the soundSelecting stereo/SAP broadcasts Using the surround sound feature Resetting your audio adjustments Adjusting the sound qualityTo turn on the built-in speakers Highlight on in above Using the sub-bass system SBSTurning off the built-in speakers To turn off the SBS Highlight OFF in aboveUsing the StableSound feature To turn off the StableSound feature Highlight OFF in aboveSelecting the Audio OUT sound Viewing the demonstration mode Selecting the background of the menu displayDisplaying on-screen information Understanding the last mode memory feature Understanding the auto power off featureAppendix SpecificationsTroubleshooting Limited United States Warranty Limited Canada Warranty Appendix Channel programming IndexManufactured by
Top Page Image Contents