Features, Location of Controls, Front Back

FEATURES

•181 Channel Tuner - The tuning system is capable of receiving all 68 VHF/UHF standard broadcast channels that are available in your area. When operating on a cable system, it can tune to the standard VHF channel frequencies plus up to 113 cable channel frequencies. The actual number of channels received depends upon channel reception in your area or your cable system.

•On-screen 3 Language Display - This TV can display the on-screen language in English, Spanish or French.

•Sleep Timer - Operable from the remote control, the TV can be programmed to turn off automatically (from 10 to 120 minutes, in 10-minute increments).

•Memory Back Up - This system prevents loss of memorized channel selections in case a power interruption to the TV should occur.

•V-Chip - The V-Chip function can read the rating of a TV program or movie content if the program is encoded with this information. V-Chip will allow you to set a restriction level (designed to work with the U. S. V-Chip system only).

•Picture Control Adjustments - The on-screen display allows precise remote control adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS.

•Closed Captioned Decoder - Displays closed captions or text on-screen (when available).

•Lock feature - This feature has three functions, LOCKING CHANNELS, LOCKING VIDEO INPUT and SETTING THE GameTimerTM.

•Programmable ON Timer - Allows you to program the TV to automatically turn on the TV at a set time.

LOCATION OF CONTROLS

FRONT

BACK

ANT

PHONE	POWER	VOLUME	CHANNEL	VIDEO AUDIO
		SET	ENTER RESET
		MENU

1 2 3

1.PHONE (Earphone) Jack - Plug an earphone or monaural headphones with a 1/8” miniplug into this jack for private listening.

2.POWER indicator - Lights up when the power is turned on.

3.Remote Sensor - Signals from the Remote Control unit are received here.

4.POWER Button - Press to turn the TV on or off.

5.VOLUME ▲/▼ Buttons - Press to raise or lower the level of the sound.

(MENU Buttons) - Press both VOLUME ▲/▼ buttons at the same time to display the on-screen menu functions. (SET + / – Buttons) - Press to select the desired set- ting during on-screen operations.

6.CHANNEL ▲/▼ Buttons - Press to select a higher or lower numbered channel set into memory.

(ENTER Button) - Press to enter or select information for on-screen operations.

(RESET Button) - Press, while in the on-screen menu mode, to reset the on-screen picture adjust- ments to their factory preset positions.

7.AUDIO/VIDEO IN Jacks - Audio and video signal cables from an external source can be connected here.

8.AC Power Cord - Plug into an outlet with 120V, 60 Hz AC power only.

9.VHF/UHF IN (ANT) Jack - Connect a VHF/UHF antenna or Cable TV 75 ohm coaxial cable to this jack.

J3M13121A(E)_P02-07

01/12/2004, 12:34 PM