OWNER’S MANUAL
PRODUCT IDENTIFICATION
Fireplace
Cabinet
Screen
Log
UNPACKING
1.Remove log box and fireplace from carton. IMPORTANT: The fireplace hood is inside the cardboard protective end wrap on the left side of fireplace (as viewed from front). A decal is on the outside of the cardboard end wrap stating hood is enclosed (see Figure 2).
2.Remove hood from cardboard protec- tive end wrap as shown in Figure 2.
3.Remove all protective packaging ap- plied to fireplace for shipment.
4.Make sure your fireplace includes one hardware packet.
5.Check fireplace for any shipping dam- age. If fireplace is damaged, promptly inform dealer where you bought fireplace.
Control Knob
Ignitor Button
Figure 1 - Vent-Free Natural Gas Compact Fireplace
Hood Enclosed | IMPORTANT: | |||
THIS PACKAGE CONTAINS A | ||||
Decal |
|
| ||
| FIREPLACE HOOD. UNWRAP | |||
| ||||
|
|
| CARTON AND REMOVE HOOD | |
|
|
| BEFORE DISCARDING | |
|
|
| PROTECTIVE PACKAGING. | |
|
|
| Cardboard | |
|
|
| Protective | |
|
|
| Fireplace | |
|
|
| ||
|
|
| End Wrap | |
LOCAL CODES
Install and use fireplace with care. Follow all local codes. In the absence of local codes, use the latest edition of The National Fuel Gas Code ANS Z223.1, also known as NFPA 54*.
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269
PRODUCT
FEATURES
SAFETY PILOT
This fireplace has a pilot with an Oxygen Depletion Sensing (ODS) safety shutoff sys- tem. The ODS/pilot is a required feature for
PIEZO IGNITION SYSTEM
This fireplace has a piezo ignitor. This sys- tem requires no matches, batteries, or other sources to light fireplace.
2 |
1 |
Hood
Figure 2 - Removing Fireplace Hood
THERMOSTATIC HEAT CONTROL
This fireplace has a thermostat sensing bulb and a control valve. The thermostat will automatically modulate the heat output to maintain a consistent room temperature. This results in greater fireplace comfort. This can also result in lower gas bills.
107031 | 3 |
