OWNER’S MANUAL
INSPECTING
BURNER
Check pilot flame pattern and burner flame pattern often.
PILOT FLAME PATTERN
Figure 31 shows a correct pilot flame pattern. Figure 32 shows an incorrect pilot flame pattern. The incorrect pilot flame is not prop- erly heating the thermocouple. This will cause the thermocouple to cool. When the thermo- couple cools, the fireplace will shut down.
If pilot flame pattern is incorrect, as shown in Figure 32
•turn fireplace off (seeTo Turn Off Gas to Appliance, page 18)
•seeTroubleshooting, pages 20 through 22
BURNER FLAME PATTERN
Figure 33 shows a correct burner flame pattern. Figure 34 shows an incorrect burner flame pattern. The incorrect burner flame pattern shows the flame consistently higher than one inch above the log.
If burner flame pattern is incorrect, as shown in Figure 34
•turn fireplace off (seeTo Turn Off Gas to Appliance, page 18)
•seeTroubleshooting, pages 20 through 22
Top of Flame About
One Inch Below Logs
Thermocouple | Pilot Burner | Figure 33 - Correct Burner Flame Pattern |
Top of Flame Consistently About
One Inch Higher Than Logs
Figure 31 - Correct Pilot Flame Pattern
(Actual Pilot May Vary From Illustration)
Figure 34 - Incorrect Burner Flame Pattern
Thermocouple | Pilot Burner |
Figure 32 - Incorrect Pilot Flame Pattern
(Actual Pilot May Vary From Illustration)
107031 | 19 |
