Search for and store the test signal of the video recorder
•Unplug the aerial cable from the aerial socket “ANT” of your video recorder.
•Switch on your TV and put the video re- corder on the test signal. (See the hand- book for your video recorder.)
•Search for the test signal of your video re- corder in the same way as you searched for and stored the TV signals. See Install, Search and Store TV channels. Store the test signal under programme number 0.
–Replace the aerial cable in the aerial socket “ANT” of your video recorder once you have stored the test signal.
Camera and Camcorder To connect to (AV-3) input
Connect your camera or camcorder at the back side of your TV.
•Connect your equipment to the TV via VIDEO (yellow), AUDIO R (red) and AU- DIO L (white) inputs. You should connect the jacks to the input in the same colour.
Connect the decoder to the video recorder
Some video recorders have a special euro- connector for decoder.
•Connect a eurocable to the euroconnector of your decoder and to the special euroconnector of your video recorder. See also the handbook of your video recorder.
•To connect your video recorder to the TV, see TV and Video Recorder section.
If you want to connect more equipment to your TV, consult your dealer.
Connecting Headphones
Use the stereo headphone socket on the back side of your TV, to connect head- phones.
Connecting the PC
Connect PC monitor with
To connect to S-Video input
Connect your camera or camcorder at the back side of your TV.
•Connect your equipment to the TV via S- Video input at the back side by using S- Video cables.
58
11 05 2004 15:30 |