HINT
Depending on the reception condi- tions in your particular area,
you may find that the list of chan- nels found includes one or more re- peated names. This is because the IDTV may detect and store some channels, including those it cannot receive clearly, from adjacent areas alongside the strong channels from a transmitter nearby. This is not a problem and the weaker channels can be deleted from the IDTV later.
If no digital terrestrial television broadcasts are found the IDTV will display a message:
Press “ SELECT” key to install channels. If no channel is found, you should then refer to the Trou- bleshooting Guide to establish the cause of the problem.
When you have finished watching digital terrestrial TV, you may wish to switch the IDTV to standby to save power - even when the television is turned off, without harm to the television or itself. The IDTV is returned to
standby by pressing the “
” key on the remote control handset.
Hint
In standby, the TV still consumes power and thereby contributes to air and water pollution and the ex- haustion of the World's natural re- sources. Overnight, or when your IDTV is not going to be used for long periods of time, you can turn it off at the mains and this will save energy (and save you money). You will not have to
36
11 05 2004 15:29 |