Before Switching on your TV
Before Switching on your TV
Power connection
Only use the adaptor supplied with this prod- uct.
IMPORTANT: The TV set is designed to oper- ate on 12 V DC. For this, an adaptor is used which gives 12V DC voltage. Connect this adaptor to a system that supplies 230V AC, 50 Hz.
•After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains.
Connections to the RF input socket
Inserting batteries in the remote control handset
•Remove the battery cover located on the back of the handset by gently pull- ing upwards from the indicated part.
•Insert two AAA (R03)/UM4 or equivalent type of batteries inside.
•Replace the battery cover.
NOTE: Remove battery from remote control handset when it is not to be used for a long period.Otherwise it can be damaged due to any leakage of battery.
Old batteries must be disposed in a des- ignated area. If performance of the re- mote control reduces, replace the batter- ies with the correct type. Do not combine a used, old battery or a new one or mixed battery types. Remove dead bat- teries immediately to prevent acid from leaking into the battery compartment.
•Connect the aerial or cable TV plug to the RF input socket located at the back of the TV and connect the cable plug coming out from the TV out socket located at the de- vices (VCR, DVB etc.) to this socket as well.
How to connect other devices
IMPORTANT: Switch off the TV before con- necting any external device.
Sockets for external connections are at the back of the TV. For connection of other devic- es via Euroconnector refer to the manuals of the related devices.
7
11 05 2004 15:29 |