Connect Peripheral Equipment
There is a wide range of audio and video equipment that can be connected to your TV.
Connection diagrams at the and of this sec- tion show you where the different equipment should be connected at the back side of the TV.
PC Sound Connection
•Connect the PC Audio output to the TFT PC Audio In socket with stereo connec- tion cable.
•In the main menu select "Feature" us- ing “
” or “
” button then enter the
Feature menu pressing “ 
”, “ 
” or “OK” button. Come on "PC Sound Mode" using “
” or “
” button and se- lect
options using “ 
”, “ 
” or “OK” button.
•Source also should be selected as PC in the main menu.
Via Ant Input
If you want to connect to your TV, periph- erals like video recorders or decoders, but the device you want to connect does not have Euroconnector, you should con- nect it to the ANT input of your TV set.
If the VCR is connected via antenna input it is suggested to use the Pro- gramme 0.
Decoder
Cable TV offers you a wide choice of pro- grammes. Most of them are free, others are to be paid for by the viewer. This means that you will need to subscribe to the broadcast- ing organisation whose programmes you wish to receive. This organisation will supply you a corresponding decoder unit to allow the programmes to be unscrambled.
For further information ask your dealer. See also the booklet supplied with your decoder.
Connect a decoder with an aerial socket to the TV
• Connect the aerial cable.
Via the Euroconnector
Your TV set has 2 Euroconnector sock- ets. If you want to connect peripherals (e.g. video, decoder, etc.) which have Eu- roconnectors, to your TV, use SCART in- put.
If an external device is connected via Euro- connector sockets TV is switched to AV mode automatically. In this case if both sockets are connected
In AV mode if you press the “
” button the TV status OSD is displayed on the screen.
Connect a decoder without an aerial socket to the TV
•Connect the decoder to your TV with a eurocable (RCA Jack Cable) to EXTERNAL (RCA Jack) (optional). When your decoder has a Euroconnector / RCA Jack you can obtain better picture quality if you connect a eurocable (RCA Jack Cable) to EXTERNAL (RCA Jack) (optional).
TV and Video Recorder
• Connect the aerial cables.
Better picture quality can be obtained if you also connect a eurocable to EXTERNAL socket (optional).
Playback NTSC
Connect NTSC VCR player to one of two Eu- roconnectors at the back of the TV.
Then, press “
“ button to select AV-1 or AV-2.
57
11 05 2004 15:30 |