Toshiba WL68 owner manual Connecting a computer, Please Note, Signal name Pin No

Page 7

Connecting a computer

Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket.

the back of your television

Audio cable for PC to television connection (not supplied)

Computer

Mini D-sub

 

 

15 pin connector

RGB PC cable (not supplied)

Conversion adaptor if required (not supplied)

Connect the PC cable from the computer to the PC terminal on the back of the television.

Connect the audio cable to the PC/HDMI1 Audio socket on the back of the television. Select PC from the PC/HDMI1 audio options in the AV connection menu located in the SET UP menu.

Press the Bto select PC mode.

The following signals can be displayed:

VGA: 640 x 480/60 Hz (VESA)

VGA: 640 x 480/75 Hz (VESA)

SVGA: 800 x 600/60 Hz (VESA)

SVGA: 800 x 600/75 Hz (VESA)

XGA: 1024 x 768/60 Hz (VESA)

XGA: 1024 x 768/70 Hz (VESA)

XGA: 1024 x 768/75 Hz (VESA)

WXGA: 1280 x 768/60 Hz (VESA)

WXGA: 1280 x 768/60 Hz (VESA) – Reduced Blanking

WXGA: 1280 x 768/75 Hz (VESA)

SXGA: 1280 x 1024/60 Hz (VESA)

SXGA: 1280 x 1024/75 Hz (VESA)

IMPORTANT NOTE: SXGA will display but it may not be displayed correctly. If using PC HDMI to TV HDMI XGA and SXGA cannot be displayed.

PLEASE NOTE:

Some PC models cannot be connected to this television.

An adaptor is not needed for computers with a DOS/V compatible mini D-sub 15 pin terminal.

A band may appear at the edges of the screen or parts of the picture may be obscured. This is due to the scaling of the picture by the set, it is not a malfunction.

When PC input mode is selected some of the television’s features will be unavailable e.g. Manual setting in the SET UP menu, Colour, Tint, DNR and Black Stretch in the Picture settings menu.

Signal information for Mini D-sub 15 pin connector

Pin assignment for RGB/PC terminal

Pin. No.

Signal name

Pin No.

Signal name

 

 

 

 

1

R

9

NC

2

G

10

Ground

3

B

11

NC

4

NC (not connected)

12

NC

5

NC

13

H-sync

6

Ground

14

V-sync

7

Ground

15

NC

8

Ground

 

 

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Toshiba Contents Mains Supply Safety PrecautionsAir Circulation Heat DamageSide View Installation and important informationWhere to install Please take noteInserting batteries and effective range of the remote Remote controlUPPresssl to SKIP-FORWARD Less than 5m Connecting external equipmentAerial cables Scart leadsPlease Note Connecting a computerSignal information for Mini D-sub 15 pin connector Signal name Pin NoUsing the controls and connections Switching onControls and input connections Manual tuning Auto tuningSelect your language Manual tune SET UPHDMI3 HDMI2 HDMI1 B3C B2 DVD Manual settingManual tune Programme skip Programme skipSound controls Using Auto tuningAuto tune, general controls, sound controls Selecting programme positionsDual Sound controls , SRS WOW sound Effects, dual, stable soundBass boost SRS WOW sound effectsSuper Live Widescreen viewingWide Super Live Cinema Subtitle 149 149Picture position Picture controlsPicture position Back lightMpeg NR Noise Reduction Colour temperaturePicture preferences Black stretchColour management Base colour adjustmentCinema mode Base colour adjustmentBlue screen Side panel adjustmentActive Vision M100 Automatic format WidescreenTime Display TimerTimer Panel lockSampling clock Clock phaseReset PC SettingsInput selection Input signal selectionIf the colour is missing try the alternative setting Input selection AV connectionsPC audio Input selection and AV connectionsHDMI1audio Text information Navigating pages using AutoNavigating pages using List Selecting modesFor use with P fand P eto view sub-pages when available Text services Control buttonsCheck that Panel lock is not on Sampling clock and adjust until the lines clearCorrect input by pressing B Check all lead connectionsQuestions Clock phase and adjust until the picture clearsSpecifications and accessories
Top Page Image Contents