Input selection and AV connections, PC audio

Input selection and AV connections continued

PC audio

In order to receive sound from a connected PC, plug the audio cable into the back of the television (as shown in ‘Connecting a computer’ section), then use the PC/HDMI1 audio settings.

1In the SET UP menu press down until

AV connection is highlighted, then press OK.


	SET UP	1/2
Language		English
Country		UK
Auto tuning		OK
Manual tuning		OK
AV connection		OK
Picture position		OK

MENU Back	EXIT Watch TV

2Highlight PC/HDMI1 audio then use right to select the PC option.

	AV connection

PC/HDMI1 audio		PC

HDMI1 audio		Digital
EXT2 input		AV
Woofer		Interal

MENU Back	EXIT Watch TV

NOTE: Selecting the PC option will force HDMI into digital audio.

HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC.

HDMI1audio

If the connected HDMI source does not support digital audio, plug the audio cable into PC/HDMI1 audio on the back of the television (as shown in the ‘Connecting a computer’ section), then use the HDMI1 audio settings.

1In the SET UP menu press down until

AV connection is highlighted, then press OK.


	SET UP	1/2
Language		English
Country		UK
Auto tuning		OK
Manual tuning		OK
AV connection		OK
Picture position		OK

MENU Back	EXIT Watch TV

2In the AV connection menu press down to highlight PC/HDMI1 audio and using right select HDMI1.

3Then highlight HDMI1 audio and using left or right select Auto., Digital or Analogue.

	AV connection

PC/HDMI1 audio		HDMI1
HDMI1 audio		Digital

EXT2 input		AV
Woofer		Internal

MENU Back	EXIT Watch TV

If the sound is missing select an alternative setting.

NOTE: HDMI1 supports digital and analogue sound, HDMI2 and HDMI3 are digital sound only.

Certain formats of DVD disk may not output from this TV (32/44.1/48kHz and 16/20/24 bits are acceptable).

If using PC HDMI to TV HDMI XGA and SXGA cannot be displayed.