Connecting external equipment
You can connect a wide range of audio and video equipment to your TV.
Connecting a video recorder
Via SCART
Make sure the TV and video recorder are both switched off.
Plug one end of the SCART lead (For connecting other equipment no leads are supplied) into the back of the video recorder and the other end into one of the SCART sockets on the back of the TV.
Switch on the video recorder and the TV. Press the (
) button on the remote control to select EXT1 or EXT2 to 
correspond with the SCART socket you are using on the back of the TV.
Please note: You can connect RGB external equipment via Scart. It is necessary to you use a full Scart cable for this purpose.
Select the video output of the external device by using its menu, and set to RGB.
| VGA |
| DC 12V |
| |
| VIDEO |
AV3 | R |
| L |
OUT | R |
AUDIO | L |
Via RCA lead (optional)
Make sure the TV and video recorder are both switched off.
Plug one end of the RCA lead into the video and audio out sockets on the back of the video recorder and plug the other end into the video and audio in sockets of the TV.
If the sound is mono, use the Audio Input L. and in the SOUND menu select the MONO feature.
Please note: If you want to use your VCR by connecting it to your TV at the modulator outlet with an antenna cable, select the program ‘0’ which is set for this type of connection.
15VL63
ENGLISH