Connecting a decoder
Via SCART
Make sure the TV and decoder are both switched off.
Plug one end of the SCART lead (not supplied) into the back of the decoder and the other end into the SCART on the back of the TV.
Switch on the decoder and the TV.
Press the (
) button on the remote control to select EXT1.
Via RCA lead
Make sure the TV and decoder are both switched off.
Note: For Decoder connection Via RCA lead your Decoder device must have the tuner built in.
| VGA |
| DC 12V |
| |
| VIDEO |
AV3 | R |
| L |
OUT | R |
AUDIO | L |
Plug one end of the RCA lead into the video and audio out sockets on the back of the decoder and plug the other end into the video and audio in sockets on the TV.
AV Outputs
You can connect any device which is proper to Phono inputs via Phono Video and Audio Outs at the back of your TV set using proper AV cable (not available with the set).
Any programme or AV input which is seen on the main screen other than
Scart sockets at the back of your TV set are always give the signals of selected programme from the set Tuner.
15VL63
ENGLISH