Via aerial socket
Make sure the TV and video recorder are both switched off.
Unplug the aerial lead form the TV and plug it into the aerial socket on the video recorder.
Plug a coaxial plug into the RF out socket on the rear of the video recorder and plug the other end into the aerial socket on the TV.
Switch on the video recorder and the TV. If your video recorder has a test signal, switch it on. (Refer to the video recorder user guide).
See ‘Tuning the TV’ and carry out the tuning procedure for the video recorder test signal. Select a programme number 0.
Via RCA lead and S-Video socket
You can also connect it through the
Plug the
15VL63
AV3
| VGA |
| DC 12V |
| |
| VIDEO |
| R |
| L |
OUT | R |
AUDIO | L |
ENGLISH