Toshiba 20AS24 Using the Lock Menu, To SET the on Timer, Locking Channels, Locking Video Input

USING THE LOCK MENU

The LOCK menu includes the CH LOCK, VIDEO LOCK, GAME TIMER and CHANGE PASSWORD functions.

You can use these functions after entering the correct PASSWORD. (This password is the same one selected under ÒSETTING THE V-CHIPÓ on page 11.)

LOCKING CHANNELS

With the CH LOCK feature, you can lock specific channels. You will not be able to tune locked channels unless you clear the setting. You can choose to lock up to nine TV channels and nine cable channels.

1Use the Channel Number Buttons (0Ð9) to display the television channel you wish to lock.

2Press MENU, then press SET + or – until the indicator next to ÒLOCKÓ begins to flash. Then press ENTER.

3Use the Channel Number buttons (0Ð9) to enter your password, then press ENTER.

	The LOCK menu appears.		LOCK
			CH LOCK
	Press SET + or – until the indicator next		VIDEO LOCK
4			GAME TIMER
			CHANGE PASSWORD
	to ÒCH LOCKÓ begins to flash, then
	press ENTER.	〈 + / – / ENTER / MENU 〉
	Press SET + or – to select:
5			CH LOCK
	• INPUT to select the channel as one to		CABLE
	be locked. Then press ENTER.		INPUT ---	---	---
	• ALL CLEAR to clear all channels from	---		---	---
		---		---	---

the list of locked channels. Then press	ALL CLEAR
	〈 + / – / ENTER / MENU 〉
ENTER.

6Repeat steps 1 through 5 to lock other channels. When you are finished locking channels, press MENU repeatedly until the menu screen is cleared.

If you try to tune a locked channel, the TV will not display it, but will display the nearest unlocked channel.

NOTES:

¥If you are accessing the LOCK menus or V-chip menus for the first time, choose a four-digit number to be your password.

¥After programming CH LOCK, change channels before turning off the television.

¥If you want to unlock channels, select ALL CLEAR in step 5, then press ENTER.

LOCKING VIDEO INPUT

With the VIDEO LOCK feature, you can lock out the input source (VIDEO) and channel 3 and 4.

You will not be able to select the input sources with the TV/ VIDEO button or Channel buttons unless you clear the setting.

SETTING THE GAME TIMER

With the GAME TIMER feature, you can automatically activate the VIDEO LOCK feature (VIDEO setting) to set a time limit for playing a TV game (30, 60, 90, or 120 minutes).

1Press MENU, then press SET + or – until the indicator next to ÒLOCKÓ begins to flash, then press ENTER.

2Use the Channel Number buttons (0Ð9) to enter your password, then press ENTER. The LOCK menu appears.

3Press SET + or – until the indicator next to ÒVIDEO￿￿￿￿￿￿￿￿￿LOCKÓ begins to flash, then press ENTER.

Press SET + or – to select:￿

•OFF: Unlocks all video input sources.

•VIDEO: Locks VIDEO.

•VIDEO +: Locks VIDEO, channel 3 and4

channel 4.

This option should be used if you use 〈 ￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿〉 the antenna to play a video tape.

5Press MENU repeatedly until the menu screen is cleared.

NOTE:

After programming VIDEO LOCK, change channels or activate the TV/VIDEO key before turning off the television.

1	Press MENU, then press SET + or – until the indicator next to
	ÒLOCKÓ begins to flash, then press ENTER.
	Use the Channel Number buttons (0Ð9) to enter your pass-
2
	word, then press ENTER. The LOCK menu appears.
	Press SET + or – until the indicator next to	￿￿￿￿￿￿￿￿￿
3
	ÒGAME TIMERÓ begins to flash, then press
	ENTER.
	Press SET + or – to select a time limit
4		〈 ￿￿￿￿￿￿￿￿￿￿￿￿￿￿〉
	(30 minutes, 60 minutes, 90 minutes, 120
	minutes or OFF).

5Press MENU repeatedly until the menu screen is cleared. After the GAME TIMER is programmed, the display will ap- pear briefly every ten minutes to remind you that the GAME TIMER is operating. When the programmed end time is reached, the display will change the channel automatically.

TO SET THE ON TIMER

This feature allows you to program the TV to turn on automatically at a set time and channel.
NOTE: After a power failure or disconnection of the power, the timer setting will be lost.
	Press MENU, then press SET + or – until	￿￿		Press SET + or – to set the desired	￿￿	￿￿￿￿￿ ￿￿￿
1			4
	the indicator next to ÒON TIMERÓ begins	￿		channel, then press ENTER.
	to flash. Then press ENTER.
	The ON TIMER menu appears.	￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿			￿￿￿￿		￿￿￿￿￿￿￿￿￿￿￿￿

2

3

Press SET + or – to set the desired hour (0Ð12), then press ENTER.

Press SET + or – to set the desired minute (00, 05, 10, ...55), then press ENTER.

5Press SET + or – to select the SET mode, then press ENTER.

6Press MENU repeatedly until the menu screen is cleared.

NOTE:

To cancel the ON TIMER, select CANCEL in step 4 above. Press MENU repeatedly until the menu screen is cleared.

12

3M21701A-E P09-BACK 12 5/2/04, 10:24