Toshiba 20AS24 manual Setting the Language, Enter

caption text will

SETTING THE LANGUAGE

This TV can display the on-screen displays and adjustment menus in English, Spanish, or French.

On-screen language selection (step 3) will automatically appear on the screen when you press the MENU button initially. Select the language you prefer first, then proceed with the other menu options.

		￿￿￿￿	￿￿￿		Press SET + or – until the Ò A Ó
1	Press MENU.			3		LANGUAGE / IDIOMA / LANGUE
					indicator points to the desired
					language: English (ENGLISH),	ENGLISH
					Spanish (ESPA„OL) or French	ESPA„OL
2	Press SET + or – to select the				(FRANCAIS), then press ENTER.	FRANCAIS
	LANGUAGE mode, then press	〈 ￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿〉				〈 + / Ð / ENTER / MENU 〉
	ENTER.

4

Press MENU repeatedly until the menu screen is cleared.

NOTE:

If Spanish or French is chosen, the closed caption indicators will be in the selected language, but the closed not be affected by the language selection.

TV OPERATION

1To turn on the TV, press POWER.

2The VOLUME can be adjusted to a desired level by pressing VOL (VOLUME) + or –.

The sound level will be indicated on the TV screen by GREEN BARS AND A NUMBER. As the sound level increases, so do the number of BARS AND THE NUMBER on the screen. The same is true for decreas- ing the level.

3Set the TV/CABLE menu option to the appropriate position. When shipped from the factory, this menu option is in the CABLE setting. See ÒTO MEMORIZE CHANNELSÓ on page 10.

TV - VHF/UHF channels

CABLE - CABLE TV channels

4CH (CHANNEL) + and – buttons

Press and release CH (CHANNEL) + or –. The channel automatically stops at the next channel set into memory. Press and hold the button down to change channels more quickly.

For proper operation, before selecting channels, they should be set into the TV's memory.

See ÒTO MEMORIZE CHANNELSÓ on page 10.

DIRECT CHANNEL SELECTION buttons (0–9) - Press

these buttons to select a channel. The channel number will appear on the upper right corner of the TV screen. If an invalid channel number is selected, the display will revert to the previous channel.

TV MODE DIRECT CHANNEL SELECTION - When the

TV/CABLE menu option is in the TV position, all channels can be instantly selected by using two buttons (For example, to select channel 2, press Ò0,Ó then Ò2.Ó If you press only Ò2,Ó channel selection will be delayed for a few seconds). For channels 10 and above, press the two digits in order.

CABLE mode direct channel selection

When the TV/CABLE menu option is in the CABLE position, channels can be selected as follows:

1-9	Press Ò0Ó twice, then 1-9 as needed.
	Example, to select channel 2, press
	Ò002.Ó
10-12	Press Ò0Ó, then remaining 2 digits.
	Example, to select channel 12, press
	Ò012.Ó
13-99	Press the 2 digits in order.
	Example, to select channel 36, press
	Ò36.Ó
100-125	Press the 3 digits in order.
	Example, to select channel 120, press
	Ò120.Ó

NOTE: If the station being viewed stops broadcasting, the TV will automatically shut off after 15 minutes.

9

3M21701A-E P09-BACK 9 5/2/04, 10:23