Toshiba 20AS26 Using the Lock Menu, To SET the on Timer, Locking Channels, Locking Video Input

〈 + / – / ENTER / MENU 〉

USING THE LOCK MENU

The LOCK menu includes the CH LOCK, VIDEO LOCK, GAMETIMER and CHANGE PASSWORD functions.

You can use these functions after entering the correct PASSWORD. (This password is the same one selected under “SETTING THE V-CHIP” on page 10.)

LOCKING CHANNELS

With the CH LOCK feature, you can lock specific channels. You will not be able to tune locked channels unless you clear the setting. You can choose to lock up to nine TV channels and nine cable channels.

1	Use the Channel Number buttons (0–9) to display the
	television channel you wish to lock.
	Press MENU, then press SET + or – until the indicator
2
	next to “LOCK” begins to flash. Then press ENTER.
	Use the Channel Number buttons (0–9) to enter your
3
	password, then press ENTER.		LOCK
	The LOCK menu appears.
			CH LOCK
	Press SET + or – until the indicator next		VIDEO LOCK
4			GAME TIMER
			CHANGE PASSWORD
	to “CH LOCK” begins to flash, then
	press ENTER.	〈 + / – / ENTER / MENU 〉
	Press SET + or – to select:
5			CH LOCK
	• INPUT to select the channel as one to		CABLE
	be locked. Then press ENTER.		INPUT ---	---	---
	• ALL CLEAR to clear all channels from	---		---	---
		---		---	---

the list of locked channels. Then press	ALL CLEAR
	〈 + / – / ENTER / MENU 〉
ENTER.

6	Repeat steps 1 through 5 to lock other channels. When you
	are finished locking channels, press MENU repeatedly until
	the menu screen is cleared.

If you try to tune a locked channel, the TV will not display it, but will display the nearest unlocked channel.

NOTES:

•If you are accessing the LOCK menus or V-chip menus for the first time, choose a four-digit number to be your password.

•After programming CH LOCK, change channels before turning off the television.

•If you want to unlock channels, select ALL CLEAR in step 5, then press ENTER.

LOCKING VIDEO INPUT

With the VIDEO LOCK feature, you can lock out the input source (VIDEO) and channels 3 and 4. You will not be able to select the input sources with the TV/VIDEO button or Channel buttons unless you clear the setting.

1	Press MENU, then press SET + or – until the indicator
	next to “LOCK” begins to flash, then press ENTER.
	Use the Channel Number buttons (0–9) to enter your
2
	password, then press ENTER. The LOCK menu appears.
	Press SET + or – until the indicator
3		VIDEO LOCK
	next to “VIDEO LOCK” begins to flash,	OFF

then press ENTER.	VIDEO
	VIDEO+

SETTING THE GameTimerTM

With the GameTimerTM feature, you can automatically activate the VIDEO LOCK feature (VIDEO setting) to set a time limit for playing a TV game (30, 60, 90, or 120 minutes).

1	Press MENU, then press SET + or – until the indicator next to
	“LOCK” begins to flash, then press ENTER.
	Use the Channel Number buttons (0–9) to enter your pass-
2
	word, then press ENTER. The LOCK menu appears.
	Press SET + or – until the indicator next to	￿￿￿￿￿￿￿￿￿
3
	“GAMETIMER” begins to flash, then press

ENTER.

4 Press SET + or – to select:

• OFF: Unlocks all video input sources.

•VIDEO: Locks VIDEO.

•VIDEO +: Locks VIDEO, channel 3 and channel 4. This option should be used if you use the antenna to play a video tape.

5 Press MENU repeatedly until the menu screen is cleared.

NOTE:

After programming VIDEO LOCK, change channels or press the TV/VIDEO key before turning off the television.

TO SET THE ON TIMER

4	Press SET + or – to select a time limit	〈 ￿￿￿￿￿￿￿￿￿￿￿￿￿￿〉
	(30 minutes, 60 minutes, 90 minutes,
	120 minutes or OFF).
	Press MENU repeatedly until the menu screen is cleared.
5
	After the GameTimer is programmed, the display will appear
	briefly every ten minutes to remind you that the GameTimer
	is operating. When the programmed end time is reached,
	the display will change the channel automatically.

NOTE:

When the programmed end time is reached, the TV will change channels automatically and the VIDEO LOCK feature will be activated. To turn off the VIDEO LOCK, see “LOCKING VIDEO INPUT,” at left.

This feature allows you to program the TV to turn on automatically at a set time and channel. NOTE: After a power failure or disconnection of the power, the timer setting will be lost.

1

Press MENU, then press SET + or – until the indicator next to “ON TIMER” begins to flash. Then press ENTER.

The ON TIMER menu appears.

ON TIMER
HOUR	00h
MINUTE	00m
CH 002	CANCEL

〈+ / — / ENTER / MENU 〉

4

Press SET + or – to set the desired channel, then press ENTER.

ON TIMER
HOUR	08h
MINUTE	15m
CH 125	SET

〈+ / — / ENTER / MENU 〉

2

3

Press SET + or – to set the desired hour (0–12), then press ENTER.

Press SET + or – to set the desired minute (00, 05, 10, ...55), then press ENTER.

5	Press SET + or – to select the SET mode, then press ENTER.
6	Press MENU repeatedly until the menu screen is cleared.

NOTE:

To cancel the ON TIMER, select CANCEL in step 4 above. Press MENU repeatedly until the menu screen is cleared.

11

3X30321A[E] P08-12 11 22/12/05, 4:38 PM