H.Step Mode Control
Selects Frame or ½ Play speed mode for Step Reverse/Step Forward buttons. DVD’s Rev Step/Rev Play mode has to be set to Frame (available in DVD menus)
I.Title/Chapter Control
Controls Title/Chapter selection and displays current Title and Chapter number
J.Cue Control
Consists of three items: Go To Button, Time Box and Frame Box. The program does not allow entering frame number and time in the same time. Typing time will automatically delete Frame Box and vice versa. If incorrect time is typed into Time Box (i.e. 023:68), a warning message box will appear. Pressing Go To button will put player into search mode. Time or Frame number should be found in less than three seconds. If Frame and Time Boxes are blank, Go To button does not have any function. Pressing ‘Space’ on the keyboard when having cursor on either Frame or Time Box will delete their contents. ‘Backspace’ button is available only when the cursor is at the end of the text (time or frame number)
K.Safety Features
Consists of two check boxes. Play Only will disable all the controls except for the Play button, and Timer will enable Play at given time
Setup window:
L.Com Port Number
Have values ‘OFF’, which will disable the appropriate DVD control frame, and numbers from 1 to 8. If number is set to
M.Com Selection Buttons Used to set com value
N.Frame Rate Selection
Selects frame rate by which remaining title time is calculated. Auto is calculated by dividing current frame and elapsed time. If result is less than 27 frames, 25 (PAL) frame rate is taken, if more 30 (NTSC) frame rate is taken.
SETTINGS
The baud rate should be set to 4800bps.
In case Rev Step/Rev Play option in DVD player’s menu is set to VOBU, reverse step/play will not work properly. For example, reverse step will not be one but about five frames. To solve this problem, set Rev Step/Rev Play option to Frame.
4