BARCODE/COMMAND STACK SETTING
1
2
DIRECT SETTING USING A BARCODE READER
1.Read a barcode with a barcode reader.
2.Send it to the player.
Example 1) Read “PLAY” and send it.
Example 2) Read “Play Title 8 Chapters 5 to 12 with Subtitle 3, Audio 2 and Angle 1” and send it.
SETTING USING THE REMOTE CONTROL UNIT
Five commands including Play 3, Pause 8, eStill/Step Eand Stop
7can be set using the remote control unit.
The chapter search, chapter play, frame search and frame segment play commands can also be set using the remote control unit.
BC/COMMAND STACK GROUP 001: 001
PLAY
1. Press the 
button.
ÖThe TITLE number will blink and the input mode will be selected.
Example 1) To set “Play”
Press the 
button.
ÖThe Barcode/Command Stack Input screen shows “PLAY” and increments to the next Input screen.
SAVE DEL INS EXIT
Display when the example on the right is input
26Barcode/Command Stack Setting
<VRB1208>