Pioneer DVD-V7200 operating instructions Connection of Mouse and Keyboard

Page 5

CONNECTION OF MOUSE AND KEYBOARD

A commercially available PS/2 mouse or PS/2 keyboard can be connected to this unit’s mouse/keyboard connector as follows.

1. Turn this unit’s POWER off to set it to the standby mode.

2. Connect the PS/2 *mouse or PS/2 *keyboard to this unit’s MOUSE/KEY- BOARD connector.

3.Turn this unit’s POWER ON.

Connection is now complete.

If you want to use both the mouse and keyboard, connect them using a commercially available “Y” cable.

ADVANCED FEATURE MENU

Note:

ÖThe power rating of this MOUSE/KEYBOARD connector is no more than 100mA. Do not use a mouse or keyboard with a current drain exceeding the rating of 100mA.

ÖCertain commercially available PS/2 mouse models, PS/2 keyboard models and “Y” cables may not be compatible with this unit. For details, please consult PIONEER technical support.

*PS/2 is a registered trademark of IBM corporation.

Connection of mouse and keyboard

Image 5

Contents DVD Video Blackboard BARCODE/COMAND Stack Advanced Feature MenuUses Control method using the mouse is explained in this sectionInput Input PlaybackAutomatic playback Manual playbackContents Connection of Mouse and Keyboard When left is clicked Player Control Using a MousePlayer Control Icon DVD Video CDAdvanced Feature Menu Baud Rate 4800 bps/9600 bps Advanced Feature Menu SettingsR.COMP options including OFF/1 to 8 MAX For ON/OFF control of OSD display during stack executeFeature Menu Advanced Feature Menu SetupAdvanced Displaying the Menu ScreenSETTING/CORRECTING the Current Time Weekly Timer OperationSet the time of the day Example To set to 81500, Wednesday April 29Move ä pointer to WED and press the Enter button Weekly Timer Operation AdvancedSetting the Weekly Timer Playing the Specified Title and Chapter Weekly Timer OperationClearing the SET Time Now the timer setting is complete Move the pointer to 2. BARCODE/COMMAND Stack and pressPlaying the specified title and chapter Power on Start FunctionPower on Start Function Turning OFF the Power on Start Function Power on Start FunctionSpecify the Barcode/Command stack Move the ä pointer to 2. BARCODE/COMMAND Stack PressRepeat Mode Setup Title Play Mode SetupBaud Rate Setup Tray Lock SetupMark Frame Squelch Setup Advanced Feature Menu Detailed InformationSquelch DUR Search Setup Sync OUT During SQ SetupInputting Characters Character INPUT/PICTURE DrawingDrawing a Picture Using the Drawing ToolsCharacter INPUT/PICTURE Drawing Details on the Blackboard Saving Characters or PicturesClick the Save button on the screen Click the Auto Disp button on the screenIndicator on the top right To Change the Display ModeDVD Video Blackboard Pencil TOOL/FREEHAND DrawingGrouping Blackboards Grouping Video BlackboardsExecuting AN Entire Group to Execute a Group Press the button Press the button twiceDVD Video Grouping Video BlackboardsBlackboard Example Time flowAdvanced Usage IntroductionBasic Usage Register a new group \Displaying the BARCODE/COMMAND Stack Screen BARCODE/COMMAND Stack SettingBARCODE/COMMAND Stack screen BARCODE/COMMAND is displayedSetting Using the Remote Control Unit Direct Setting Using a Barcode ReaderTitle number will blink and the input mode will be selected Display when the example on the right is inputBARCODE/COMMAND Stack Setting BARCODE/COMMAND Stack input screen of the next step appears Pressing the button switches over to the following displayRepeat indicator appears on the screen Press the button while the title number is blinkingTo Cancel Input in the Middle Setting the SUBTITLE, Audio and AngleTo USE only the Chapter Search or Frame Search To Change a Value During InputPress the button to display LD VIDEO, Audio SetupPress = = = = As the Video number will blink, pressSaving a BARCODE/COMMAND Stack Saving BARCODE/COMMAND StackDisplay disappears and the input information is saved Display disappearsTo Delete a Previously Input BARCODE/ Command Stack To Delete a Previously Input BARCODE/COMMAND StackBarcode/Command Stack screen is displayed Select no with Button and pressCorrecting a Previously Input BARCODE/COMMAND Stack Correcting a Previously Input BARCODE/COMMAND StackThis initiates the Barcode/Command Stack input mode Select 003 ä by pressing the or button Press the buttonAdding a Step in a Previously Input BARCODE/COMMAND Stack Adding a Step in a Previously Input BARCODE/COMMAND StackSelect no with the or button and press Button Grouping Some BARCODE/COMMAND StacksGrouping Some BARCODE/COMMAND Stacks Press the or button Switching the BARCODE/COMMAND Stack GroupDeleting a Group Move the ä pointer to Save by pressing Button and press Grouping some Barcode/Command StacksDividing a Previously Input Group Button and press List display of the last group that was input is displayed Joining TWO BARCODE/COMMAND Stack GroupsChange the group with the button BC/COMMAND Stack Group 003 To Execute Steps in a Command Group Using a BARCODE/COMAND StackRECALLING/EXECUTING Barcode Commands in Memory Button is defeated unless the function mode is switched off Using a BARCODE/COMAND StackThis displays a list of commands Select a group by pressing the or buttonHOW to Display Total Hours Played and Total Power on Time No.....X External Synchronizing FunctionSynchronized use of 2 or more players 98F00ZZ0D00 0 0 8 7 2 4 1 5