BARCODE/COMMAND STACK SETTING
SETUP OF LASERBARCODE COMPATIBLE DISCS
BC/COMMAND STACK GROUP 001: 001
TITLELD
SEARCH FRAME 01500
MARK FRAME 01800
VIDEO0
AUDIO3
Display when the example on the right is input
Example) Playback of “analog stereo” audio channel from frame 1500 to 1800 without video.
1. Press the 
button.
ÖThe TITLE number will blink.
2. Press the 
button to display LD.
ÖBe sure to set the laser barcode compatible disc command to the TITLE LD display.
3. Press 
= 
=
=
= 
.
ÖThe start frame number is entered.
ÖIf the procedure up until this point has been done during playback, the start frame that was input is searched for.
4.Press 
= 
=
=
= 
.
Ö The stop frame number is entered.
5.As the VIDEO number will blink, press 
.
Ö The playback picture disappears.
6.As the AUDIO number will blink, press 
.
Ö Audio will be entered and the next step proceeded to.
7.Press the 
button to return to the cursor mode.
NOTE:
Pressing the 
button after step 2 will select the chapter input mode. Refer to example 3 on page 27 for the input methods of
SEARCH CHAPTER and MARK CHAPTER.
VIDEO, AUDIO SETUP
VIDEO:
ÖInputting 1 selects normal video output.
ÖInputting 0 selects the background color set on the GUI menu and cancels the playback picture.
ÖInputting 9 maintains the previous mode. Input when you want to leave the VIDEO setting as is and change other settings.
Ö2 to 8 are invalid.
AUDIO:
On laser barcode compatible discs, laser disc digital audio and analog audio are converted and recorded in the DVD format.
Audio can be selected as follows.
ÖInputting 0 selects the Audio OFF playback mode.
ÖInputting 1 selects the “Analog audio 1/L” playback mode.
ÖInputting 2 selects the “Analog audio 2/R” playback mode.
ÖInputting 3 selects the “Analog audio” stereo mode.
ÖInputting 5 selects the “Digital audio 1/L” mode.
ÖInputting 6 selects the “Digital audio 2/R” mode.
ÖInputting 7 selects the “Digital audio” stereo mode.
ÖInputting 9 maintains the previous mode.
Ö4 and 8 are invalid.
CAUTION:
When “Maintaining previous mode” is selected “*” is displayed on the input screen.
30Barcode/Command Stack Setting
<VRB1208>