BARCODE/COMMAND STACK SETTING
BC/COMMAND STACK GROUP 001: 001
TITLE |
| 00 |
SEARCH FRAME | 000000 | |
MARK | FRAME - - - - - - | |
SUBTITLE | 01 | |
AUDIO |
| 2 |
ANGLE |
| 3 |
SAVE | DEL INS | EXIT |
Pressing the 
button switches over to the following display.
BC/COMMAND STACK GROUP 001/ 001 001 
SUBTITLE 01 AUDIO 2 ANGLE 3
002
SAVE DEL INS EXIT
BC/COMMAND STACK GROUP 001: 001
TITLE | 03 |
SEARCH FRAME | 123000 |
MARK FRAME | 129000 |
SAVE DEL INS EXIT
BC/COMMAND STACK GROUP 001: 002
TITLE | 00 |
SEARCH FRAME | 000000 |
MARK FRAME | - - - - - - |
SUBTITLE | * |
AUDIO | * |
ANGLE | * |
Example 4) To input the command for setting Subtitle 1, Audio 2 and Angle 3
1. Press the 
button.
ÖThe TITLE number will blink.
2.Press the 
while the TITLE digits are blinking.
3.When the SUBTITLE digits start to blink, press 
then 
.
4.When the AUDIO digit starts to blink, press 
.
5.When the ANGLE digital starts to blink, press 
.
ÖWith a play command that specifies the start and end frames, it is not possible to set the subtitle, audio and angle simultaneously. However, by placing the subtitle, audio and angle setting command as described above before the frame section play command, the section playback can be executed with the specified setting.
The input as shown above allows to play title 3 frames 10000 to 15000 by setting Subtitle 1, Audio 2 and Angle 3.
With commands other than the frame section play command, such as the frame search, chapter search and chapter section play commands, the specified setting is valid within each command.
Example 5) To repeat “Play Title 3 frames 123000 to 129000” in Example 2
1. Perform steps 1 to 6 in Example 2.
ÖThe BARCODE/COMMAND STACK input screen of the next step appears.
2.Press the 
button while the title number is blinking.
3.Press the 
button.
ÖThe REPEAT indicator appears on the screen.
SAVE DEL INS EXIT
BC/COMMAND STACK GROUP 001: 002
REPEAT
SAVE DEL INS EXIT
28Barcode/Command Stack Setting
<VRB1208>