BARCODE/COMMAND STACK SETTING
SETTING THE SUBTITLE, AUDIO AND ANGLE
SUBTITLE
Ö“00” turns the screen color to the color specified in “Background color” in the GUI menu and makes the played image invisible.
Ö“01” to “32” displays the corresponding subtitle.
Ö“33” plays with Subtitle OFF.
Ö“34” is used to make the played image made invisible with “00” visible again.
Ö“99” retains the previous condition. This is used to change other setting than SUBTITLE while maintaining the SUBTITLE setting the same.
Ö“35” to “98” are invalid.
AUDIO
Ö“0” plays image with Audio OFF.
Ö“1” to “8” selects and plays the corresponding audio.
Ö“9” retains the previous condition.
ANGLE
Ö“1” to “8” selects and plays the corresponding angle.
Ö“9” retains the previous condition.
Ö“0” selects and plays Angle 9.
CAUTION
ÖWhen “retain the previous condition” is selected, “*” is displayed in the input screen.
ÖThe barcode/command stack cannot be executed if a value that does not exist in the disc is input.
TO USE ONLY THE CHAPTER SEARCH OR FRAME SEARCH
In item “MARK CHAPTER” or “MARK FRAME”, simply press the 
button without setting anything.
A still image is displayed after search., still image is displayed after search.
TO CHANGE A VALUE DURING INPUT
Press the numeric button of the correct number (including 0).
To return to a previous setting point, press the 
button.
TO CANCEL INPUT IN THE MIDDLE
Press the 
button to return to the cursor mode, move the ä
(pointer) to “EXIT” by pressing the 
button and press the 
button.
BARCODE/COMAND STACK
Barcode/Command Stack Setting
29
<VRB1208>