Pioneer DV-59AVI, DV-S969AVi Controls and displays About progressive scan video

Page 28

03Controls and displays

About progressive scan video

Compared to interlace video, progressive scan video effectively doubles the scanning rate of the picture, resulting in a very stable, flicker-free image.

Progressive scan video is available only from the component video output. Use the PROGRESSIVE button on the front panel to switch the component video output and (except DV-59AVi and DV-S969AVi Australian model) the D video out between interlace and progressive. With a DVD-Video disc you can do this during playback, or when the disc is stopped. For other types of disc, the player must be stopped.

•If you connect a TV that is not compatible with a NTSC or PAL progressive scan signal and switch the player to progres- sive, you will not be able to see any picture at all. In this case, press the PROGRES- SIVE button on the front panel to switch back to interlace (the PROGRESSIVE indi- cator should be unlit).

•You can’t switch video output when an OSD is on-screen.

•The picture on some TVs may momen- tarily break up when you switch the video output of this player.

Compatibility of this unit with progressive-scan TVs.

This player is compatible with progressive video Macro Vision System Copy Guard.

CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525/625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNEC- TION TO THE “STANDARD DEFINITION” OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525/625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.

This player is compatible with the following Pioneer displays and monitors:

•DV-59AVi – PDP-5040HD, PRO-720HD, PRO-910HD, PDP-4340HD, PRO-800HDI, PRO-1000HDI, PRO-1100HD.

•DV-S969AVi – PDP-504HDG, PDP- 434HDG.

•DV-59AVi only – The monitors listed above are not compatible with PAL progressive scan.

28

En

Image 28

Contents DV-59AVi DV-S969AVi Important Safety Instructions For U.S. model Important NoticeFor Canadian model For Australian model On the bonnet of the unitFor U.S. and Australian model Contents Video Settings menu Initial Settings menuVideo Adjust Additional informationBefore you start FeaturesBefore you start Chapter Before you start Putting the batteries in the remote control Using the remote controlWarranty card DV-59AVi only Before you start What’s in the boxGeneral disc compatibility CD-R/RW compatibilityDVD-R/RW Compatibility Compressed Audio CompatibilityPC Created Disc Compatibility Titles, chapters, groups and tracksCDs, SACDs and Video CD/Super VCDs are divided into tracks Before you start DVD-Video regions Connecting up Connecting up ChapterRear panel Audio OUT 2chVideo OUT 1&2 Connecting upDV-S969AVi except Australian model only Connecting up Easy connections To power outletConnecting up Using other types of video output Connecting using an S-Video outputConnecting using the component video output Connecting using the D1/D2 video outputConnecting up Connecting for multichannel surround sound Connecting using the multichannel analog outputsConnecting using a digital audio output AV receiverConnecting using i.LINK Connector AV receiverAbout i.LINK Creating an i.LINK networkLink cable Connecting up Connecting using Hdmi About HdmiControlling this player from another Pioneer component Controls and displays Chapter Controls and displaysFront panel Controls and displays Compatibility of this unit with progressive-scan TVs Controls and displays About progressive scan videoDV-S969AVi PDP-504HDG, PDP- 434HDG 1CH GUI Graphical User InterfaceGRP 10 CHPControls and displays Remote control Press to switch the player on or into standbyPress to display or exit the on-screen display Enter & JoystickJog indicator Number buttonsTV Control buttons DV-59AVi only TV DV-59AVi onlySetting up the remote to control your TV Preset code listGetting Started Switching onGetting Started Chapter Using the on-screen displays Press Enter again to finish setting upGetting Started Let’s Get Started Press Enter to move on to the next screenSetting up with the Setup Navigator Select ‘Setup Navigator’Getting Started Menu playDV-59AVi screen Select a DVD languageDid you connect this player to an AV receiver? DTS Congratulations, setup is complete Getting Started Playing discs Basic playback controlsPress OPEN/CLOSE to open the disc tray Load a disc Press play to start playbackDVD disc menus Front panel controlsVideo CD/Super VCD PBC menus Displays the PBC menuWhy won’t the disc I loaded play? Some MP3 tracks don’t show up. Where are they?There’s no picture My DVD-Audio disc starts playing, but then suddenly stopsWhat’s wrong? There’s no picture from the Hdmi outputPlaying discs Chapter Playing discsIntroduction Scanning discs To resume normal playback, press playPlaying discs Using the Multi Dial Playing in slow motionDuring playback, press Pause Press and hold Until Press repeatedly to change the slow motion speedPlaying discs Frame advance/frame reverse Looping a section of a discPlaying discs Using repeat play Using random playCreating a program list Select a random play optionRandom Title Random Chapter Random Off Random Group Random Track Random OffSelect ‘Create/Edit’ from the list of program options Repeat to build up a program List Editing a program listTo play the program list, press play Searching a disc Other functions available from the program menuSelect a program play function Create/Edit See Creating a program list onSwitching subtitles Switching the DVD audio languagePress Enter to start playback Press Subtitle repeatedly to select a subtitle optionSwitching DVD-RW audio channels Switching DVD-Audio audio channelsSwitching camera angles Displaying disc informationDVD-RW displays Sacd displaysDuring multichannel playback only CD and Video CDAudio Settings menu Audio Settings menu ChapterDefault setting Off Audio DRCAudio Settings menu There are four settings, plus OffHi-Bit Virtual SurroundChannel Level Speaker Distance DV-S969AVi screenVideo Settings menu Video Settings menu ChapterVideo Adjust Creating your own presetsVideo Settings menu Adjust the picture quality settingsVideo signal. This setting only affects Progressive video outputVideo Settings menu Initial Settings menu Initial Settings menu ChapterUsing the Initial Settings Digital Audio Out settings Menu Default setting OnInitial Settings menu Dolby Digital OutDTS Out Linear PCM OutVideo Output settings Mpeg OutTV Screen Component OutLanguage settings Video OutStill Picture Audio LanguageSubtitle Language Auto LanguageDisplay settings Registering a new password OptionsBackground Screen SaverChanging your password Setting/changing the Parental Lock levelSelect ‘Password Change’ Use number buttons to enter your password, then press EnterSetting/changing the Country code Bonus GroupSelect a new level Select ‘Country Code’Auto Disc Menu Default setting SingleGroup Playback DVD Playback Mode Hdmi SettingsDefault setting DVD-Audio Default setting 2ch AreaAspect Ratio ResolutionVideo Memory Audio Output Mode SpeakersCD Playback DTS DownmixSet in Setup Navigator default L/R Speaker InstallationLarge C Large LS/RS Large SW On Speaker Distance Channel LevelAuto Initial Settings menu Link Setup Connections SetupAudio Out Auto Select PlayDefault setting 5.1 Channel DVD-Audio OutAdditional information Chapter Additional informationTaking care of your player and discs Additional information Resetting the player Screen sizes and disc formatsWidescreen TV users Standard TV usersAdditional information About the audio output settings DTS CDAdditional information About the Hdmi output settings Additional information About the i.LINK output settings Additional information Setting the TV System Watching Ntsc on a PAL TVDV-S969AVi only TV system changes as followsAdditional information Language code list Country code listLanguage Language code letter, Language code Country, Country code, Country code letterGlossary Dynamic range File extensionMpeg audio LinkPqls Precision Quartz Lock System rate control Progressive scan videoSampling frequency Slideshow DVD, Video CD/Super VCDGeneral Additional information TroubleshootingDisc won’t play or is automatically ejected after loading See Using the remote control on Batteries in the remote control onSetting the TV System on DVD/CD/Video CD/Super VCD playerAudio Output Mode on Check that Linear PCM Out is set to Down Sample Off Output Mode onCompatibility on Hdmi troubleshooting Link troubleshooting Output Mode is set to 5.1 Channel see Audio Output Mode onLINK-related messages Link CheckAdditional information Specifications Pioneer Corporation