Pioneer DV-59AVI, DV-S969AVi operating instructions LINK-related messages, Link Check

09Additional information

Problem	Remedy
Playback starts	• This is an i.LINK feature and not a malfunction.
automatically when the
input function of the AV
receiver is changed to this
player.

A connected i.LINK component doesn’t work with this player.

•Depending on the connected component, this player may not work properly with it. See also the operating instructions that came with the other component.

i.LINK-related messages

You may see the following messages displayed in the front panel display when using the i.LINK interface.

BUS FULL

The i.LINK bus has reached its capacity and cannot transmit any more data.

LINK CHECK

The player is checking the i.LINK network. It does this, for example, when components are added or removed from the network. The sound may be interrupted if this happens during playback.

PQLS ON

Displayed when the player receives a rate control on request from the receiver during playback. The sound may be interrupted momentarily when this happens.

Note that the PQLS feature works only when the player is connected to a single receiver.

PQLS OFF

Displayed when the player receives a rate control off request from the receiver during playback. The sound may be interrupted momentarily when this happens.

LOOP CONNECT

The i.LINK network cannot function because it is connected in a loop (see Creating an i.LINK network on page 22).

•Static electricity or other external influ- ences may cause malfunctioning of this unit. In this case, unplug the power cord and then plug back in. This will usually reset the unit for proper operation. If this does not correct the problem, please consult your nearest Pioneer service center.

98

En