Pioneer DV-S969AVi, DV-59AVI Video Output settings, Mpeg Out, TV Screen, Component Out

Initial Settings menu 08

•When an HDMI component is connected, the setting is automatically fixed to Down Sample Off. However, 96kHz sources will still be downsampled to 48kHz.

MPEG Out

• Default setting: MPEG > PCM

You only need to make this setting if you connected this player to an AV receiver (or other component) using one of the digital outputs.

Initial Settings
Digital Audio Out	Digital Out	MPEG
Video Output	Dolby Digital Out	MPEG > PCM
Language	DTS Out
Display	Linear PCM Out
Options	MPEG Out
Speakers
i.LINK Setup

If your AV receiver (or other connected component) is compatible with MPEG audio, set this to MPEG, otherwise set it to MPEG > PCM (MPEG audio is converted to more compatible PCM audio). Check the manual that came with the other component if you’re unsure whether it is MPEG audio compatible.

Video Output settings

TV Screen

• Default setting: 16:9 (Wide)

Initial Settings
Digital Audio Out	TV Screen	4:3 (Letter Box)
Video Output	Component Out	4:3 (Pan&Scan)
Language	S-Video Out	16:9 (Wide)
Display	Still Picture	16:9 (Compressed)
Options
Speakers
i.LINK Setup

If you have a widescreen TV, select the 16:9 (Wide) setting—widescreen DVD software is then shown using the full screen area. When playing software recorded in conventional

(4:3) format, the settings on your TV will deter- mine how the material is presented—see the manual that came with your TV for details on what options are available.

When set to 16:9(Compressed), progressive- scan 4:3 material is shown with black bars on either side of the screen.

If you have a conventional TV, select either 4:3 (Letter Box) or 4:3 (Pan&Scan). In Letter Box mode, widescreen software is shown with black bars at the top and bottom of the screen. Pan & Scan chops the sides off widescreen material to make it fit the 4:3 screen (so even though the image looks larger on the screen, you’re actually seeing less of the picture). See also Screen sizes and disc formats on page 83.

•You can’t change the video output setting when an HDMI component is connected.

Component Out

• Default setting: Interlace

You only need to make this setting if you connected this player to your TV using the component video outputs.

Initial Settings
Digital Audio Out	TV Screen
		Progressive
Video Output	Component Out	Interlace
Language	S-Video Out
Display	Still Picture
Options
Speakers
i.LINK Setup

If you have a progressive-scan compatible TV, set this to Progressive for flicker-free video output. If your TV is not compatible with progressive-scan video, set to Interlace. Check the operating instructions that came with your TV if you’re unsure about its compatibility.

65

En