Pioneer DV-S969AVi, DV-59AVI Initial Settings menu Link Setup, Audio Out, Connections Setup

Initial Settings menu

i.LINK Setup

Audio Out

• Default setting: On

You only need to make this setting if you connected this player to other equipment using the i.LINK interface.

Initial Settings
Digital Audio Out	Audio Out	On
Video Output	Connections Setup	Off
Language	Auto Select Play
Display	DVD-Audio Out
Options
Speakers
i.LINK Setup

Change this setting to Off if the i.LINK inter- face is still connected but you need to use one of the other outputs. Changing this setting to Off does not affect i.LINK thru data (i.e., if this player is between two other i.LINK compo- nents, it will still pass data between them).

Set back to On (i.LINK-ready) to be able to use the i.LINK interface.

08

i.LINK Audio are shown in black (an i.LINK receiver, for example); those which can’t (a DV camcorder, for example) are shown in gray. If the player can’t display the name of a component, ‘****’ is shown; if the name can’t be determined, Unknown is displayed.

Select the component that you want to set up the audio output formats for.

Initial Settings
Digital Audio Out	Connections Setup
Video Output	VSX-49TXi : Pioneer
Language
Display	DolbyDigital	PCM
Options	DTS	DTS
Speakers	MPEG	MPEG
i.LINK Setup

This screen shows the output settings for Dolby Digital, DTS and MPEG audio. Depending on the other component, these may be configured automatically. If this player can’t determine the appropriate settings, the defaults are Dolby Digital, DTS and PCM. If you need to change the settings, move the cursor right and make the new setting.

Connections Setup

You only need to make this setting if you connected this player to other equipment using the i.LINK interface.

Initial Settings
Digital Audio Out	Audio Out	VSX-49TXi
Video Output	Connections Setup	VSX-AX10i
Language	Auto Select Play	DV-47Ai
Display	DVD-Audio Out
Options
Speakers
i.LINK Setup

This screen shows the equipment connected using the i.LINK interface.

Components which are able to receive

Auto Select Play

• Default setting: Off

You only need to make this setting if you connected this player to other equipment using the i.LINK interface.

Initial Settings
Digital Audio Out	Audio Out	Off
Video Output	Connections Setup	VSX-49TXi
Language	Auto Select Play	VSX-AX10i
Display	DVD-Audio Out
Options
Speakers
i.LINK Setup

79

En