Pioneer DV-C302D operating instructions Video Connections, Component Video OUT

Video Connections

This player features S-video, composite video and component video output possibilities. Check the manual supplied with your TV or monitor to determine the best possible connection for your system.

In addition to making physical connections to your TV or monitor, it is also necessary to assign the TV screen size. You can use the [Setup Navigator] in the Setup screen General to set whether you are using a wide screen or standard size TV or monitor (page 21). Additionally, you can use the [TV Screen] setting in the Setup screen Video menu (page 33).

S-VIDEO OUT

•Make S-video connections to a TV or monitor with S-video input to produce a high quality video image.

•Use an S-video cable (not supplied) to connect one of the S-VIDEO OUT jacks on the player to S-video input on the TV or monitor.

•When using this jack, be sure to set VIDEO OUT SELECT to the left position.

DV-C302D

S-VIDEO OUT	VIDEO
	OUT
	SELECT

S-VIDEO IN

TV or monitor

VIDEO OUT

•Make composite video connections to a standard TV or monitor with a video input jack.

•Use the supplied video cable to connect one of the VIDEO OUT jacks on the player to the video input on the TV or monitor.

•Be sure to match the color of the plug with the color of the jack (yellow).

•When using this jack, be sure to set VIDEO OUT SELECT to the left position.

DV-C302D

VIDEO OUT	VIDEO
	OUT
	SELECT

VIDEO IN

COMPONENT VIDEO OUT

•Make component video connections to a projection monitor, projector or TV with component inputs to produce a higher quality video image.

•Use component video cables or 3 video cords (not supplied) to connect the COMPONENT VIDEO OUT jacks on the player to the component jacks on the monitor.

•When making component video connections, make sure to set the VIDEO OUT SELECT switch on the rear panel of the player to the right to assign component video output.

Projection monitor, projector or TV

VIDEO
OUT
SELECT
DV-C302D
	COMPONENT
	VIDEO IN
	Y
Y
COMPONENT
VIDEO OUT	PB
PB
PR	PR
System Control Connections		MAKING
Using a commercially available cord with a mini plug		CONNECTIONS
(3.5 mm dia. with no resistance) to connect this player’s

CONTROL IN jack to the CONTROL OUT jack of another PIONEER component bearing the ë mark, you can control the player as though it were a component in a system (system control).

•If you connect for system control, you cannot operate the player directly. Point the remote control unit at the component (AV amplifier, etc.) connected to the CONTROL OUT jack to operate.

•When controlling as a system, be sure to make a connection to the amplifier using an audio or video cord, even when using only digital components.

•For details, refer to the operation manuals of the connected components.

DV-C302D

CONTROL

IN

CONTROL

OUT

	Pioneer component
TV or monitor	with ë mark.	19