Pioneer DV-C302D To coordinate your speaker system for 5.1 channel output, Channel, Not Connected

Setting analog audio connections to an AV amplifier or receiver

The [Analog Jacks] screen establishes whether analog connections have been made to an AV amplifier or receiver, and if connections are made, whether the connections made are for 2 channel stereo or for 5.1 channel surround sound.

Audio1 2 Video Language General

Setup Navigator
Amp Connection
		2 Channel
Analog Jacks		5.1 Channel
		Not Connected
2 channel jacks for L/R
Move
	ENTER	Select	SETUP	Exit

Settings: 2 Channel*

Select if you have made 2 channel connections to an amplifier or receiver.

5.1 Channel

Select if you have made 5.1 channel connections to an AV amplifier or receiver with the appropriate inputs. When this setting is selected, several screens will follow to determine the configuration of your speaker system. These screens are described below in the section ‘To coordinate your speaker system for 5.1 channel output’.

Not Connected

Select if you have not made analog audio connections.

* Factory setting

To coordinate your speaker system for 5.1 channel output

When “5.1 Channel” is selected in the [Analog Jacks] screen, the following screens appear to determine the configuration of your speaker system. In all of the following screens, select “Present” if the speaker in question is present in your system, and “Not Present” if it is not.

[Center Speaker]

Audio1 2 Video Language General

Setup Navigator

Amp Connection

Center Speaker Present

Not Present

Center speaker is connected to an amplifier

Move ENTER Select SETUP Exit

[Surround Speakers]

Audio1 2 Video Language General

Setup Navigator
Amp Connection
Surround Speakers		Present
		Not Present
Surround speakers are connected
to an amplifier
Move	ENTER	Select	SETUP	Exit

[Sub-woofer]

Audio1 2 Video Language General

Setup Navigator

Amp Connection

Sub-woofer Present

Not Present

Sub-woofer is connected to an amplifier

Move ENTER Select SETUP Exit

Settings: Present*

Not Present

* Factory setting

Note

(If “Not Present” is selected for both [Center Speaker] and [Surround Speaker], [Sub-woofer] is automatically set to “Not Present” and the [Sub-woofer] screen is not displayed.

22