Pioneer DV-S733A Home theater video connections, Connecting D Video and S-Video cables

Connecting Up

Home theater video connections

This player outputs video in a number of different ways. Choose the one most suitable for your system using the guide below.

2

Important

Before making or changing any rear panel connec- tions, make sure that all components are switched off and unplugged from the wall outlet.

1	If your TV has a component video input, we recommend using it
	to connect directly to the COMPONENT VIDEO OUT of this

player. Use the standard 3-jack component video ouput (DV- S733A only: you can also use the D1/D2 D-Video jack).

DV-S733A

DV-47A AC Inlet.

AC IN

AC IN

			S-VIDEO	VIDEO	AUDIO OUT			AUDIO OUT
			OUT	OUT	1	(2CH)	FRONT	(5.1CH)	CENTER
						2		SURROUND
VIDEO OUT	COMPONENT VIDEO OUT							L
D1 / D2	Y	PB	1	1	L
			PR
			2	2	R
								R	SUB
									WOOFER

DIGITAL OUT CONTROL

OPTICAL COAXIAL IN

OUT

2 If a component input is not available to you, connect this player to your TV or AV receiver using either the VIDEO or S-VIDEOjacks.

Connecting D Video and S-Video cables

D Video (DV-S733A only) and S-Video cables will only plug in one way, so make sure the plug is correctly lined up with the jack before inserting. Be sure to fully insert for a good connection.

S-Video or composite video?

S-Video should give a better picture, so if you have an S-Video input, use it. S-Video cables are available from any good audio/visual dealer.

11

En