Pioneer DV-S733A operating instructions Additional Information

Page 58

8 Additional Information

Handling discs

When holding discs of any type, take care not to leave fingerprints, dirt or scratches on the disc surface. Hold the disc by its edge or by the center hole and edge.

Damaged or dirty discs can affect playback perfor- mance. Take care also not to scratch the label side of the disc. Although not as fragile as the recorded side, scratches can still result in a disc becoming unusable.

Should a disc become marked with fingerprints, dust, etc., clean using a soft, dry cloth, wiping the disc lightly from the center to the outside edge as shown in the diagram below.

Discs to avoid

Discs spin at high speed inside the player. If you can see that a disc is cracked, chipped, warped, or otherwise damaged, don't risk using it in your player—you could end up damaging the unit.

This unit is designed for use with conventional, fully circular discs only. Use of shaped discs is not recommended for this product. Pioneer disclaims all liability arising in connection with the use of shaped discs.

Wipe lightly from the

Don’t wipe the disc surface

center of the disc using

using circular strokes.

straight strokes.

 

If necessary, use a cloth soaked in alcohol, or a commercially available CD/DVD cleaning kit to clean a disc more thoroughly. Never use benzine, thinner or other cleaning agents, including products designed for cleaning vinyl records.

Storing discs

Although CDs and DVD discs are more durable than vinyl records, you should still take care to handle and store discs correctly. When you're not using a disc, return it to its case and store upright. Avoid leaving discs in excessively cold, humid, or hot environments (including under direct sunlight).

Don't glue paper or put stickers onto the disc, or use a pencil, ball-point pen or other sharp-tipped writing instrument. These could all damage the disc.

For more detailed care information see the instruc- tions that come with discs.

Do not load more than one disc into the player.

58

Cleaning the pickup lens

The DVD player’s lens should not become dirty in normal use, but if for some reason it should malfunction due to dust or dirt, consult your nearest Pioneer-authorized service center. Although lens cleaners for CD players are commercially available, we do not recommend using them since some may damage the lens.

Problems with condensation

Condensation may form inside the player if it is brought into a warm room from outside, or if the temperature of the room rises quickly. Although the condensation won’t damage the player, it may temporarily impair its perfor- mance. For this reason you should leave it to adjust to the warmer temperature for about an hour before switching on and using.

En

Image 58
Contents DV-S733A DV-47A Page Important Notice H006AEn For U.S. modelOperating Environment H045 En Table Of Contents Graphical Setup Navigator What is Super VCD? DV-S733A onlyVideo Adjust TruSurround*3Before You Start Putting the batteries in the remote controlUsing the remote control What’s in the boxDVD-R compatibility DV-S733A only DVD Video compatibilityDVD Audio compatibility DVD-RW compatibility DV-S733A onlyDVD Video regions MP3 compatibility informationConnecting audio and video cables Connecting UpEasy Setup Connecting control cablesVideo or composite video? Connecting D Video and S-Video cablesHome theater video connections DV-47A AC InletConnecting coaxial cables Connecting analog audio cablesConnecting optical cables Home theater audio connectionsDisplay Controls & DisplaysCharacter display Remote control Display Remote control sensor Preset Code ListLegato PRO indicator Front panelAbout MOD. Modulation PAL Display indicates the new settingGetting Started TV system changes as followsPress Setup Using the Setup NavigatorPress STANDBY/ON to switch on Select ‘Start’Select the type of TV you have Choose an OSD menu languageTaiwanese model English Congratulations, set up is complete Press Setup to exitSettings Select ‘Save Changes’ to makePress 0 to open the disc tray Load a disc Switch the player onPlaying discs Press 3 to start playbackDVD-Video, DVD-R/RW and Super VCD/ Video CD only Basic playback controlsDVD-Video and DVD-R/RW only Use the 4 and ¢ to see the previous/ next Navigating DVD-RW discs menusPress Menu To display this disc menu during playback, press MenuIntroduction Press Search Mode repeatedly to choose betweenPlaying Discs Finding what you want on a discUsing the Multi Dial To switch the camera angle, press Angle Switching camera anglesSwitching subtitles Current subtitle language is shown on-screenTo switch the audio channel, press Audio repeatedly Switching audio languageSwitching audio channel To set audio language preferences, seePress Program Making a program listEnter the title/chapter numbers for your program list Programming tips Enter the track numbers for your program listRandom Title/Group Using random playPress Random repeatedly to select a random play mode DVD only Press Enter or 3 to start random playLooping a section of a disc Using repeat playPress Repeat during playback to select a repeat mode To resume normal playback, press Clear TipTo resume playback, load the disc and press Last Memory Bookmarking a place in a discDV-47A U.S. model Press 7 if you want to stop playback hereMemorizing disc settings Condition MemoryTo use the shortcut menu Using setup menu shortcutsTo add a menu item to the shortcut list To delete an item from the shortcut menuDisplaying disc information To show/switch the information displayed, press DIS- PlayExample Playing MP3s Playing MP3sPress 3 to start playing the first MP3 track on the disc Searching for folders and tracks Displays when playingDisplays when stopped Displaying MP3 informationTotal number of Track Using the MP3 NavigatorNavigate using the following controls Menu Exit the MP3 NavigatorUse the number buttons to enter a three- digit track number Making a program list of MP3 tracksPress Program to enter the MP3 Program screen Program Exit the MP3 Program screenSetup Menu Mode DVD Setup MenuUsing the Setup menu Default setting ExpertOn Screen Display Audio settingsOSD Language Audio DRCDTS Out Default Dolby DigitalDolby Digital Out Linear PCM OutSacd Playback Mpeg OutDigital Out Virtual SurroundAudio Out About source audio outputSub On Surround Large Distance all 3.0m Speaker SettingThis setting does not apply to Sacd play- back Subwoofer SW can only be set to On or OffLegato PRO Default setting Fix Gain SettingsCD Digital Direct Video Out Video settingsTV Screen Frame SearchCompatibility of this unit with progressive- scan TVs BackgroundComponent Video Plasma Display U.S. modelYou can also access these settings by pressing V. ADJ Selecting a presetSelect a preset Select ‘Video Memory Select’Select ‘Video Setup’ Creating your own settingPress Enter to save your changes Select ‘Video Setup’ Press Display Angle IndicatorStill Picture Audio Language Default Setting English Subtitle LanguageAuto Language Subtitle Language settingsDefault Setting w/Subtitle Language DVD LanguageSubtitle Display General settingsSetup Navigator Subtitle OffChanging your password Registering a new passwordSetting/changing the Parental Lock level Bonus Group Default setting SingleAuto Disc Menu Group PlaybackAdditional Information Moving the player Hints on installationPower cord caution Don’tGlossary Optical digital output Mpeg videoMulti-session Packed PCM DVD-Audio onlyTroubleshooting Picture disturbance during playback or dark Remote control doesnt seem to workNo audio, or audio is distorted Cannot output 192kHz or 176.4kHz digital audio Cannot play multi-channel audioNo digital audio output Cannot output 96kHz or 88.2kHz digital audioResetting the Player All settings will have been clearedCountry Code List Language code listAdditional Information When viewing on a standard TV or monitor Specifications GeneralWe Want You Listening For a Lifetime Additional Information TWKZW/01J00000 Printed