Pioneer DV-S733A Before You Start, What’s in the box, Putting the batteries in the remote control

H048 En

Before You Start

*1 Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. © 1992- 1997 Dolby Laboratories. All rights reserved.

*2 “DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc.

*3 TruSurround and the ® symbol are trademarks of SRS Labs, Inc. TruSurround technology is incorporated under license from SRS Labs, Inc.

What’s in the box

Thank you for buying this Pioneer prod- uct. Please confirm that the following accessories are in the box when you open it.

•Remote control

•AA/R6P dry cell batteries x2

•Stereo audio cable (red/white)

•Video cable (yellow)

•Power cable

•These operating instructions

Putting the batteries in the remote control

1Open the battery compartment cover on the back of the remote control.

2 Insert two AA/R6P batteries into the bat- tery compartment following the indications (ª, ·) inside the compartment.

3 Close the cover.

1

Note

Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following:

•Don’t mix new and old batteries together.

•Don’t use different kinds of battery to- gether—although they may look similar, different batteries may have different voltages.

•Make sure that the plus and minus ends of each battery match the indications in the battery compartment.

•Remove batteries from equipment that isn’t going to be used for a month or more.

When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area.

Using the remote control

Keep in mind the following when using the remote control:

•Make sure that there are no obstacles between the remote and the remote sensor on the unit.

•Use within the operating range and angle, as shown.

30

30

7m (23 feet)

•Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the unit’s remote sensor.

•Remote controllers for different devices can interfere with each other. Avoid using remotes for other equipment located close to this unit.

•Replace the batteries when you notice a fall off in the operating range of the remote.

7

En