Pioneer DV-S733A Programming tips, Enter the track numbers for your program list

5 Playing Discs

6Press ENTER or 3 to start playback immedi- ately, or PROGRAM to exit if you want to start playback later.

During program play, you may occasionally see the start of a chapter that was not programmed when the chapter number changes. This is not a malfunc- tion.

Note

You can’t program track numbers over 100 on

SACDs.

For Super VCDs/Video CDs that feature PBC, make sure that the disc is stopped before you start.

1Press PROGRAM.

Program Track

Current:		Track	1(/10)
	Total Time		0.00

Move ENTER Play PROGRAM Exit

2Enter the track numbers for your program list.

For tracks 1–9, use the corresponding number buttons. For 10 and over, use the +10 button (+10, +10, 4 for 24, etc.)

•You can program a pause instead of a track/ chapter: press 8 instead of entering a number in the program list. (A pause can't be the first or last step in the list.)

•A program list can contain up to 24 steps.

3Press ENTER or 3 to start playback immedi- ately, or PROGRAM to exit if you want to start playback later.

•You can't start playback later with a PBC Super VCD/Video CD; press ENTER or 3 to start.

28

Programming tips

•To view the program list press PROGRAM.

•To delete a step in the program list, position the cursor on the title/group/ chapter/track and press CLEAR.

•To insert a step into the program list, position the cursor where you want the new step to appear, then enter the title/group/ chapter/track number.

All the following steps move up one.

•To add the currently playing title/group/ chapter/track to the program list, press and hold PROGRAM for about a second.

If there is no current program list, a new one is created (for DVD, if the last list created was a title list then the a title program list is created, otherwise a chapter program list is created).

•To delete the program list, stop playback (press 7), then press CLEAR.

The program list is also erased when you remove the disc from the player or turn the power off (standby).

•To delete a memorized DVD program list, load the DVD, press PROGRAM, then change the Program Memory option to Off. Press ENTER to confirm.

En