Pioneer BDP-120 Communication Setup, Current Ethernet setup info, Netmask, Gateway, Proxy Not Use

Address

Port

Next

• If selecting “Yes”: The IP address or proxy server name and port number for the proxy server specified from your internet service provider are entered using the screen for inputting characters. (See page 42.)

• If selecting “No”: Go to the next step.

(Continued on the next page)

Yes

No

Primary

Secondary

Next

• If selecting “Yes”: The DNS IP address is automatically obtained. (The DHCP server function of the router or modem is used for the automatic acquisition.)

• If selecting “No”: The primary and secondary IP addresses are entered using the screen for inputting characters. (See page 42.)

Regarding each of the setup values, confirm the specifications of your broadband router.

8 Select “Next”, then press ENTER.

9 For setting the proxy server, press  to select “Yes” or “No”, then press ENTER.

Do you use the proxy server?

Yes

No

IP Address

Netmask

Gateway Next

• If selecting “Yes”: The IP address is automatically obtained.

• If selecting “No”: The IP address, netmask and gateway are manually entered using the screen for inputting characters. (See page 42.)

Regarding each of the setup values, confirm the specifications of your broadband router.

6 Select “Next”, then press ENTER.

7 For setting the DNS IP address, press  to select “Yes” or “No”, then press ENTER.

Do you obtain the DNS IP address automatically?

Yes

No

5 For setting the IP address, press  to select “Yes” or “No”, then press ENTER.

Do you obtain the IP address automatically?

SETTINGS

Communication Setup

This allows you to perform and/or change the communication setting. This setting is required to use BD-LIVE functions that connect to the internet.

NOTE

•Make sure that the LAN cable is connected to this Player. (See page 18.)

•For manually performing the setting, the following information of the connected router or modem is required. Confirm the information prior to the setting.

−IP address, netmask, gateway, DNS IP address

•Besides, if specifying a proxy server, the following information specified from your internet service provider is also required. Confirm the information prior to the setting.

−IP address and port number of the proxy server

1Press HOME MENU to display the Home Menu screen.

2Press  to select “Settings”, then press ENTER.

3Press  to select “Communication Setup”, then press ENTER.

4Press  to select “Change”, then press

ENTER.

Current Ethernet setup info.

IP Address	: Auto Setup
Netmask	: Auto Setup
Gateway	: Auto Setup
DNS	: Auto Setup
Proxy	: Not Use
Change

Initialize

•For initializing the current setting, select “Initialize”, then press ENTER.

40